Bosch ‎2608644537 pyörösahanterä 15 cm 1 kpl

Expert for Aluminium circular saw blade, 150 mm, 48 teeth, suitable for cordless saws and dry-cutters. The blade is fitted with MicroteQ carbide teeth and a ProteQtion anti-corrosive coating to reduce friction and extend lifetime. It is compatible with common cordless plunge and handheld saws and can be used with or without reduction rings to fit different bore sizes.

Advantages

Extra-thin kerf reduces power consumption and helps extend battery runtime on cordless saws. MicroteQ carbide teeth use extra-fine carbide grains for high durability and reliable performance when cutting non-ferrous metals such as aluminium. The ProteQtion coating provides anti-corrosive protection, reduces friction and helps maintain cutting performance over time. The bore is designed to work with or without reduction rings to adapt to different machine arbors.

Suitable for

• Cutting aluminium and other non-ferrous metals
• Use in cordless plunge and handheld saws
• Dry cutting applications with compatible dry-cutters

Key specifications

• Diameter: 150 mm
• Teeth: 48
• Maximum speed: 10000 RPM
• Tooth material: MicroteQ carbide
• Coating: ProteQtion anti-corrosive
• Quantity: 1 piece

How to use

Fit the blade to a compatible circular saw or dry-cutter following the tool manufacturer's instructions. Use reduction rings if required to match the blade bore to the saw arbor. Secure the blade according to the machine's fastening procedure, check rotation direction, and set appropriate cutting speed up to the indicated 10000 RPM. Clamp the workpiece and make steady feeds; avoid forcing the blade to preserve teeth life. Use appropriate personal protective equipment and follow the saw manufacturer's safety guidelines.

Recommendations

For best results when cutting aluminium, use steady, moderate feed rates and ensure chips can clear the cut. Keep the blade clean and inspect teeth regularly; replace the blade when cutting quality deteriorates. Do not exceed the maximum RPM and use the blade only on materials specified by the manufacturer.