Bosch PSM 160 A monihiomakone 24000 kierr./min 160 W

The Bosch Multi sander PSM 160 A is a compact oscillating sander designed for a wide range of sanding tasks. Equipped with a 160 W motor and a maximum idle speed of 24,000 RPM, it delivers consistent sanding performance while remaining lightweight at 1.4 kg. The sander’s oscillating orbit diameter of 1.6 mm and eccentricity of 0.8 mm provide efficient material removal and a fine surface finish. A sanding surface area of 1.04 m² allows fast coverage of workpieces, making this tool suitable for detail work as well as larger surfaces.

Advantages

The tool combines a compact form factor with a high-speed motor to balance maneuverability and sanding efficiency. Its low weight reduces user fatigue during extended use and improves control when working on vertical or overhead surfaces. The specific orbit and eccentricity values support both aggressive stock removal and fine finishing depending on the abrasive used. The relatively large sanding area shortens working time on broad panels while preserving access to corners and edges thanks to the Multi sander’s shape.

Suitable for (tasks / use cases)

Key specifications

How to use

Select the appropriate abrasive for the material and task, secure the sandpaper to the sander’s pad according to the manufacturer’s attachment system, and connect the tool to a compatible power source. Start the sander at light contact to the workpiece, move it with steady, overlapping passes and avoid applying excessive pressure — the tool’s speed and orbit provide the required abrasion. For edges and corners, use controlled short strokes. Regularly inspect the abrasive and dust collection outlet, and replace or clean consumables as needed to maintain consistent performance.

Recommendations

Use medium-grit abrasive for initial stock removal and switch to fine-grit paper for finishing. Wear appropriate personal protective equipment such as eye protection and a dust mask, and work in a well-ventilated area. For prolonged tasks, alternate hand positions and allow short breaks to minimise fatigue and ensure even sanding results.