CableMod C-Series Pro ModMesh 16-pin–2×8-pin punottu virtakaapeli Corsair Type 3/4 -virtalähteille, carbon, 60 cm

CableMod C-Series Pro ModMesh 16-pin to 2×8-pin Sleeved Power Cable for Corsair Type 3/4 PSUs, Carbon, 60 cm is a custom sleeved modular cable designed to replace the standard 16‑pin to dual 8‑pin lead on compatible Corsair Type 3 and Type 4 power supplies. The cable uses ModMesh sleeving to provide a low-profile, textured finish in carbon colour and a 60 cm length to allow flexible routing within mid-tower and larger cases. It maintains the original electrical wiring configuration (12V‑2x6 wiring) required for GPU/CPU rails that accept two 8‑pin connectors, preserving PSU functionality while giving a cleaner, more consistent appearance in custom builds.

Advantages

The sleeved ModMesh design improves cable management by offering a uniform, flexible sheath that resists fraying and hides individual wires. As a modular replacement cable specifically matched to Corsair Type 3 and Type 4 modular pinouts, it requires no modification to the power supply and retains the correct 12V‑2x6 wiring for safe operation. The 60 cm length balances reach and tidiness for common motherboard and GPU placements, and the carbon colour integrates well with neutral and dark-themed builds.

Suitable for

• Custom PC builds using Corsair Type 3 or Type 4 modular PSUs
• GPU or high-power CPU connections that use dual 8‑pin power inputs
• Systems where improved cable routing and internal aesthetics are desired
• ITX to mid-tower cases where a 60 cm cable length is appropriate

Key specifications

• Connector configuration: single 16‑pin modular plug to two 8‑pin connectors
• Wiring: 12V‑2x6 wiring suitable for dual 8‑pin power rails
• Length: 60 cm total cable length
• Sleeving material: ModMesh sleeved finish
• Colour: Carbon (dark grey/black tone)
• Compatibility: Corsair Type 3 and Type 4 modular PSU pinout

How to use

Ensure the power supply is fully powered down and unplugged before installing the cable. Match the 16‑pin modular plug to the appropriate socket on a Corsair Type 3 or Type 4 modular PSU and insert until firmly seated. Connect the two 8‑pin ends to the corresponding GPU or motherboard CPU/PCIe power inputs, observing the connector orientation. Verify all connections are secure and perform a power-on test to confirm system stability. Do not force connectors; if a connector does not seat, recheck alignment and PSU compatibility.

Recommendations

Use this cable only with Corsair Type 3 and Type 4 modular PSUs or other power supplies explicitly documented as having an identical 16‑pin to dual 8‑pin modular pinout. Keep bend radii gentle near connectors to avoid stress on wires, and periodically inspect sleeving and connectors for damage when servicing the system.