Tili Ota yhteyttä
Ostoskorisi
Toimitus DPD & FedEx
Tarvitsetko apua? Kysy AI:lta

CoreParts MMH9744/8GB muistimoduuli 1 x 8 GB DDR2 240-napainen DIMM ECC

CoreParts MMH9744/8GB muistimoduuli 1 x 8 GB DDR2 240-napainen DIMM ECC
CoreParts MMH9744/8GB muistimoduuli 1 x 8 GB DDR2 240-napainen DIMM ECC
60,79 €
The CoreParts MMH9744/8GB is an 8 GB DDR2 memory module with a 667 MHz clock and ECC support, designed for use in PCs and servers. This single-module configuration provides increased system memory capacity while maintaining data integrity through error-correcting code. The module is produced using o... Lue lisää
Varasto Loppu varastostaEi varastossa Tuotekoodi 2406638 Merkki COREPARTS Malli MMH9744/8GB Takuu 2 vuotta

Toimitus ja palautukset

The CoreParts MMH9744/8GB is an 8 GB DDR2 memory module with a 667 MHz clock and ECC support, designed for use in PCs and servers. This single-module configuration provides increased system memory capacity while maintaining data integrity through error-correcting code. The module is produced using original chip sets from certified suppliers and comes in a green PCB color.

Advantages

This CoreParts memory module offers ECC functionality to detect and correct single-bit memory errors, improving system reliability. With a 667 MHz DDR2 frequency and an 8 GB capacity, the module matches the performance characteristics of standard DDR2 memory while providing compatibility for systems that require ECC. The single-module format allows straightforward installation and upgrade of available memory slots.

Suitable for

  • Desktop PCs that accept DDR2 DIMMs
  • Entry-level and legacy servers requiring ECC memory
  • Workstations needing additional stable memory for multitasking

Key specifications

  • Brand: MicroMemory
  • Model / MPN: MMH9744/8GB
  • Capacity: 8 GB
  • Type: DDR2
  • Clock speed: 667 MHz
  • ECC: Supported
  • Color: Green
  • Weight: 0.09 kg
  • EAN: 5712505926932

How to use

Power off the computer and disconnect it from the mains before installing the memory module. Open the system case to access the DIMM slots, align the notch on the DDR2 module with the slot, and press the module firmly until the retention clips snap into place. Close the case, reconnect power, and start the system. Verify that the BIOS/UEFI recognizes the new 8 GB module and that ECC is enabled if required by the motherboard.

Recommendations

Install this 8 GB DDR2 ECC module in systems that explicitly support DDR2 DIMMs and ECC functionality. When upgrading servers or workstations, check motherboard documentation for supported memory configurations and maximum capacity. Handle the module by its edges and avoid contact with the gold contacts to reduce the risk of electrostatic damage.
Tärkeimmät ominaisuudet
  • Desktop PCs that accept DDR2 DIMMs
  • Entry-level and legacy servers requiring ECC memory
  • Workstations needing additional stable memory for multitasking
  • Brand: MicroMemory
  • Model / MPN: MMH9744/8GB
  • Capacity: 8 GB
  • Type: DDR2
  • Clock speed: 667 MHz
  • ECC: Supported
  • Color: Green
  • Weight: 0.09 kg
  • EAN: 5712505926932
Tekniset tiedot
Alkuperämaa
China
ECC
Yes
Harmonized System (HS) -koodi
84733020
Käyttökohde
PC/Server
Korkeus
30 mm
Leveys
140 mm
Muistin kellotaajuus
667 MHz
Muistin muototekijä
240-pin DIMM
Muistin puskurointi
Fully buffered
Muistin rakenne (moduulit x koko)
1 x 8 GB
Paino
90 g
Pakkauksen korkeus
30 mm
Pakkauksen leveys
140 mm
Pakkauksen paino
100 g
Pakkauksen syvyys
80 mm
Sisäinen muisti
8 GB
Sisäisen muistin tyyppi
DDR2
Syvyys
80 mm
Tuotteen väri
Green
Hintahistoria ei ole vielä saatavilla
Tästä tuotteesta ei ole vielä kertynyt riittävästi päivittäisiä hintatietoja.

Suositut tuotteet tässä kategoriassa

Myyjä: UAB KUR LT · Laisvės pr. 125A, LT-06118 Vilna, Liettua · Yritystunnus 303192950 · ALV-numero LT100008198612 · Toimitus EU:sta (Liettua)
Messenger
Hei, olen DistriNoden tekoälyavustaja. Autan sinua löytämään tuotteita, vertailemaan vaihtoehtoja, laatimaan tarjouksia PDF-muodossa tai tekemään tukipyyntöjä.