CoreParts MMST-DDR3-24007-4GB muistimoduuli 1 x 4 GB 240-napainen DIMM

The CoreParts DDR3 4GB 1600MHz memory module by MicroMemory is a single 4 GB DIMM designed for desktop PCs and compatible servers. Built to the 240-pin DIMM form factor, this DDR3 module operates at a clock speed of 1600 MHz with a CAS latency of 11 and a supply voltage of 1.5 V. It provides a straightforward way to increase system RAM capacity for improved multitasking and smoother operation of memory‑intensive applications.

Advantages

This 4 GB DDR3 memory module offers compatibility with systems that accept 240-pin DIMM modules and support DDR3-1600. The module’s 1600 MHz clock frequency and CAS latency of 11 deliver predictable performance for general computing, office tasks, and many content‑creation workflows. Its single‑module layout (1 x 4 GB) allows flexible upgrades without replacing existing memory, and the standard 1.5 V operating voltage matches legacy DDR3 system requirements.

Key specifications

• Capacity: 4 GB
• Memory type: DDR3
• Clock speed: 1600 MHz
• Form factor: 240-pin DIMM
• Operating voltage: 1.5 V
• Latency: CL11

How to use

Power down the computer and disconnect it from mains before installing the module. Open the case to access the motherboard memory slots, discharge static by touching a grounded metal surface, then align the module with the 240‑pin DIMM slot keyed notch and press firmly and evenly until the retention clips latch. After installation, reconnect power and start the system; check BIOS/UEFI to confirm the new memory is recognized and adjust memory settings if required by the motherboard manual.

Recommendations

For best compatibility, install the module in a slot recommended by your motherboard manual and use matching modules (same type, speed and voltage) when populating multiple channels. If upgrading a system with existing memory, verify the maximum supported RAM and supported memory speeds in the motherboard or system documentation before purchasing.