DANFOSS 140F0450 ohutkerroslämpömatto 150W/m² 3,5m² 0,5x7,0m itseliimautuva

Installing underfloor heating in a renovation or new build often means choosing between slow, bulky systems and the risk of cold spots. This DANFOSS thin-bed heating mat solves that by providing an ultra-thin, self-adhesive mesh that lays directly under tile, stone, laminate, or engineered wood floors, delivering 150 W/m² of even warmth across a 3.5 m² area.

Who is it for

This mat is for professional installers and experienced DIYers who need a reliable, quick-to-install heating solution for small to medium rooms such as bathrooms, kitchens, or hallways. It is particularly suited to renovation projects where floor height is limited.

Main features

• Self-adhesive mesh backing for fast, secure positioning without additional fixing clips.
• Ultra-thin, fully screened twin conductor heating cable with FEP insulation and PVC outer sheath.
• Total power output of 525 W at 230 V AC, with a resistance of approximately 100.76 Ohms.
• Cold lead length of 2.5 m for flexible connection to a thermostat.
• Compatible with DEVIreg™ thermostats for precise temperature control.

Specifications

• Heating output: 150 W/m²
• Heated area: 3.5 m²
• Mat dimensions: 0.5 m width × 7.0 m length
• Total power: 525 W
• Operating voltage: 230 V AC
• Cable type: Twin conductor
• Cable diameter: 3.5 mm
• Conductor insulation: FEP (Fluorinated Ethylene Propylene)
• Outer sheath: PVC (Polyvinyl Chloride)
• Cold lead length: 2.5 m
• Minimum installation temperature: -5 °C
• Maximum operating temperature: 90 °C
• Resistance: ~100.76 Ohms

Tips

Ensure the subfloor is clean, dry, and level before rolling out the mat. The self-adhesive backing works best at temperatures above -5 °C. Always test the heating cable resistance before and after installation, and use a dedicated thermostat for optimal comfort and energy efficiency.