Kingston Technology KSM64R52BD8-32MD muistimoduuli 32 GB 1 x 32 GB DDR5 6400 MT/s 288-pin DIMM

The Kingston 32GB DDR5 288-pin DIMM CAS 52 memory module is a single 32GB DDR5 stick designed for desktop and server systems that support DDR5 DIMMs. It offers a CAS latency of 52 and operates at a DDR5 standard voltage of 1.1 V. The 288-pin form factor matches standard DDR5 DIMM slots, delivering increased capacity and improved data throughput compared with previous-generation modules. This module is intended to expand system memory for demanding multitasking, professional applications and server workloads while maintaining compatibility with platforms that accept unbuffered DDR5 DIMMs.

Advantages

This DDR5 memory module provides a substantial 32 GB capacity in a single module, reducing the need for multiple DIMMs and simplifying upgrades. DDR5 architecture improves bandwidth and efficiency compared with DDR4, and the low operating voltage of 1.1 V helps reduce power consumption under load. The 288-pin DIMM layout ensures mechanical compatibility with standard DDR5 sockets, and the specified CAS latency of 52 gives a predictable timing characteristic for system tuning and stability testing.

Suitable for

Key specifications

How to use

Power down the computer and disconnect it from the mains before installing the module. Open the system chassis and locate an empty compatible DDR5 288-pin DIMM slot. Align the notch on the module with the slot keyed notch, insert the module vertically and press down firmly until the side latches click into place. After installation, reconnect power and enter system firmware/BIOS to confirm that the new 32 GB module is recognized and that memory settings (frequency and timings) match platform recommendations. For systems with multiple channels, install modules according to the motherboard manual to enable optimal channel configuration.

Recommendations

Use this module in systems whose motherboard and CPU officially support DDR5 DIMMs and 288-pin unbuffered memory. For best stability, update the system BIOS to the latest vendor release and verify compatibility with the motherboard memory QVL. When combining modules, match capacity, speed and voltage where possible. Handle the module by its edges and avoid touching contacts; observe ESD precautions during installation.