LED-kattovalaisin ActiveJet AJE-KAMA 24W pyöreä 4000K 2580 lm IP20 40 cm

The Activejet LED ceiling plafond AJE-KAMA 24W Round White 30 Bulbs is a compact round ceiling fixture designed for general interior illumination. It integrates 30 non-changeable LED bulbs in a white housing and delivers neutral white light with a colour temperature of 4000 K. The fixture is powered from the mains (220–240 V, 50/60 Hz) and has a low profile with a height of 98 mm and a diameter of 40 cm, making it suitable for universal locations where efficient, uniform lighting is required.

Advantages

This LED ceiling plafon provides consistent neutral white illumination across a wide area while maintaining low power consumption at 24 W. The built-in LEDs remove the need for lamp replacement, and the slim, round design simplifies installation on standard ceilings. Its 40 cm diameter balances light coverage and compactness, and the white finish integrates unobtrusively into varied interior styles.

Suitable for

• Living rooms and bedrooms requiring neutral white ambient lighting
• Kitchens and dining areas with need for uniform illumination
• Corridors, hallways and stairwells in residential buildings
• Small offices, meeting rooms and general-purpose workspaces

Key specifications

• Power consumption: 24 W
• Light source: 30 non-changeable LED bulbs integrated
• Colour temperature: 4000 K (neutral white)
• Input voltage and frequency: 220–240 V, 50/60 Hz (AC mains)
• Product colour: White
• Dimensions: height 98 mm, diameter 400 mm

How to use

Mount the Activejet AJE-KAMA ceiling plafond on a suitable ceiling surface following local electrical codes. Ensure mains power is switched off before installation. Connect the fixture to the 220–240 V supply according to the wiring diagram provided in the product documentation and secure the unit flush to the ceiling using appropriate fasteners. After installation, switch on the mains to check that the neutral white light operates correctly. As the LEDs are non-changeable, no lamp replacement is required during normal operation.

Recommendations

For best results, install the fixture in rooms with standard ceiling heights; avoid direct exposure to excessive moisture or continuous damp environments unless the product documentation states suitability. Clean the exterior surface with a dry or slightly damp cloth after disconnecting power. If used in workspaces, position the fixture centrally to ensure even light distribution.