Nestemäisen jäähdytyksen sarja Corsair H100I

The iCUE LINK H100i RGB 240mm All-In-One CPU Cooler (Corsair H100I, CW-9061001-WW) is a closed-loop liquid cooling kit designed to deliver efficient CPU cooling with integrated RGB lighting and simplified cabling. The kit includes a 240mm radiator, two QX RGB 120mm fans, a high-performance pump head with split-flow copper cold plate and pre-applied CORSAIR XTM70 thermal paste, and an iCUE LINK System Hub for single-cable connectivity and device chaining.

Advantages

The cooler reduces cable clutter through iCUE LINK single-cable technology that automatically detects and configures compatible components and lets devices connect in a chain. It offers efficient and quiet cooling via an optimized pump head and split-flow copper cold plate, fan PWM control with Zero RPM support, and temperature sensors in each QX RGB fan. Lighting is provided by QX RGB fans with 34 LEDs per fan and Time Warp lighting mode. The included iCUE software allows monitoring and control of fan and pump speeds, RGB synchronization, and temperature readings.

Suitable for

• Gaming PCs and high-performance desktops requiring 240mm AIO cooling
• Builders seeking reduced cable clutter and easy component chaining
• Systems using supported CPU sockets (AM5, AM4, LGA 1700, LGA 1200, LGA 1156, LGA 1155, LGA 1151, LGA 1150)

Key specifications

• Product type: Liquid cooling kit
• Radiator size: 240 mm
• Fan diameter: 120 mm (QX RGB fans, 34 LEDs per fan)
• Fan speed: 480–2400 RPM (manufacturer data in product summary)
• Maximum air pressure: 3.8 mmH2O
• Included thermal paste: CORSAIR XTM70 (pre-applied)
• Supported sockets: Socket AM5, Socket AM4, LGA 1700, LGA 1200, LGA 1156, LGA 1155, LGA 1151, LGA 1150
• Colour: Black
• Weight: 2.12 kg
• MPN: CW-9061001-WW, EAN: 840006665816

How to use

Mount the radiator and fans in your case according to radiator orientation and airflow preferences, fit the pump head to the CPU socket following the included mounting brackets for your platform, and connect the QX RGB fans and pump to the supplied iCUE LINK System Hub. Attach the single iCUE LINK cable from the hub to a compatible header on your motherboard or CORSAIR controller, then install CORSAIR iCUE software to detect devices, configure fan curves, adjust pump speed, and synchronize RGB lighting. Ensure the pre-applied thermal paste establishes contact between the cold plate and CPU during installation.

Recommendations

Install the cooler on a clean CPU surface and verify secure mounting. Use iCUE to configure appropriate fan and pump curves for your workload; enable Zero RPM mode for reduced noise at low loads. Maintain regular case airflow and check mounting and tubing for secure fitting during system maintenance.