SeeEyes SC-MAC02 + verkkolaite 3-porttinen Gigabit PoE -jatko virtalähteellä

Most PoE extenders force a compromise between distance, power, and reliability—this one doesn't. The SeeEyes SC-MAC02 + PSU takes a single Power over Ethernet input and turns it into two independent PoE outputs, each capable of delivering up to 30W. That means you can run two IP cameras, access points, or other PoE devices from one cable run, without adding a local power source. With support for IEEE 802.3af/at/bt input, it works with the latest PoE++ switches and injectors, while its aluminum housing and surge protection keep it running in harsh environments.

Highlights

• Extends PoE network by up to 100 meters per segment, with store-and-forward architecture for stable performance.
• Accepts up to 90W PoE input (IEEE 802.3bt) and distributes up to 60W total across two PoE outputs (IEEE 802.3af/at).
• Gigabit Ethernet ports (10/100/1000 Mbps) ensure high-speed data for bandwidth-hungry devices.
• Rugged aluminum alloy housing with ESD and surge protection, suitable for industrial or outdoor use.
• Flexible mounting options: wall-mount or DIN-rail, with LED indicators for power and PoE status.
• Includes a dedicated power supply unit (PSU) for installations where PoE input is not available.

In daily use

Installation is straightforward: connect the PoE input from your switch or injector, then run cables to your PoE devices. The SC-MAC02 automatically negotiates power with each connected device, so you don't need to configure anything. The jumbo frame support (up to 9K bytes) is a bonus for video surveillance systems that push large packets. And because it's fanless and sealed, you can place it in attics, utility closets, or even outdoors under an eave without worrying about dust or moisture.

Full specifications

• PoE Input Standard: IEEE 802.3af/at/bt (PoE++)
• PoE Output Standard: IEEE 802.3af/at
• Ethernet Ports: 1x PoE In, 2x PoE Out
• Data Transfer Rate: 10/100/1000 Mbps (Gigabit Ethernet)
• Max PoE Extension Distance: Up to 100m (328ft) per segment
• Max Input PoE Power: 90W (IEEE 802.3bt)
• Max Output PoE Power per Port: 30W (IEEE 802.3at)
• Total Output PoE Power Budget: Up to 60W (shared across 2 ports)
• Power Source: PoE (Power over Ethernet) or included PSU
• Operating Temperature: -10°C to 50°C (14°F to 122°F)
• Operating Humidity: 0% to 90% RH (non-condensing)
• LED Indicators: Power, PoE Input, PoE Output Status
• Mounting Options: Wall-mount, DIN-rail mount
• Housing Material: Aluminum Alloy
• Protection Features: ESD, Surge Protection
• Transmission Method: Store and Forward
• Jumbo Frame Support: Up to 9K Bytes
• MAC Address Table Size: 1K
• Certifications: CE, FCC, RoHS

Final note

For installers and integrators, the SC-MAC02 + PSU is a reliable way to extend PoE networks without running new power lines. Its dual PoE output and wide compatibility make it a versatile tool for any IP-based infrastructure.