Ulkoseinävalaisin Philips myGarden Bustan 9W antrasiitti alumiini LED

The Philips myGarden Bustan 9W Anthracite Aluminium LED outdoor wall lighting is an L-shaped fixture designed for exterior façades and outdoor living areas. Housed in anthracite-coloured aluminium, it integrates a warm white LED source and runs on AC mains power (220–240 V). With compact dimensions of 78 mm width, 220 mm depth and 220 mm length, this wall light provides diffused, energy-efficient illumination that accentuates walls and pathways while maintaining a minimalist appearance.

Advantages

This LED outdoor wall light offers low energy consumption and a long lamp lifetime thanks to its integrated LED technology. The aluminium housing in anthracite provides corrosion resistance and a contemporary look suitable for modern façades. The L-shaped design produces soft, diffused warm white light that reduces glare and creates even illumination on vertical surfaces. Its compact size and mains compatibility simplify installation on typical exterior walls.

Suitable for

• Illuminating building façades and entrance areas
• Lighting garden walls, terraces and patios
• Accent lighting for pathways and outdoor seating zones
• Replacing conventional outdoor wall lamps with an energy-efficient LED solution

Key specifications

• Light source: integrated LED, warm white
• Power consumption: 9 W
• Input voltage: AC 220–240 V
• Housing material: aluminium with anthracite finish
• Dimensions (W × D × L): 78 mm × 220 mm × 220 mm
• Design: L-shaped, wall-mounted

How to use

Mount the fixture on a suitable exterior wall following local electrical codes. Connect the unit to a 220–240 V AC supply and ensure the electrical connection is made with power switched off. Position the L-shaped housing so the diffused light faces the wall surface to achieve even illumination. Use the fixture for regular outdoor lighting; no separate bulbs are required because the LED is integrated.

Recommendations

For best results, install the Philips myGarden Bustan at a height and spacing that provide consistent wall wash and avoid direct eye-level glare. Ensure the mounting location offers protection from extreme mechanical impact and that wiring is performed by a qualified electrician. Regularly inspect the aluminium housing for debris and clean with a soft cloth to preserve finish and light output.