3D-tulostimen filamentti Flashforge ABS 1,75 mm AO1 oranssi 1 kg

Flashforge ABS 1.75 mm AO1 in orange is a 1 kg spool of ABS thermoplastic filament formulated for FDM/FFF 3D printers that accept 1.75 mm ABS. The filament is intended for structural parts, housings and functional prototypes where mechanical strength and dimensional stability are required. Its orange color provides a consistent finish for visible components and is compatible with common post-processing methods such as sanding, priming and painting when standard ABS printing conditions are observed.

Advantages

The filament offers a balance of toughness and rigidity suitable for mechanical parts and utilitarian models. Good layer adhesion and controlled shrinkage improve dimensional accuracy for medium- to large-sized prints. The consistent diameter and spool winding reduce feeding issues and support reliable extrusion. The material accepts typical post-processing techniques, allowing for a smoother surface and color matching through paint or primer.

Suitable for

• Functional prototypes and enclosures
• Mechanical parts and brackets
• Tools, jigs and fixtures for workshop use
• Decorative components that require post-processing and painting

Key specifications

• Material: ABS (acrylonitrile butadiene styrene)
• Diameter: 1.75 mm nominal
• Spool weight: 1 kg net filament
• Color: orange
• Recommended extrusion temperature range: typical for ABS (consult printer guidelines)
• Compatible printing technology: FDM/FFF

How to use

Load the filament into a 1.75 mm compatible extruder and set printer parameters for ABS: heated bed, elevated nozzle temperature and suitable print cooling settings. Use a heated build plate and an enclosure or draft protection where possible to minimize warping and layer separation. Calibrate extrusion multiplier and first layer height for consistent adhesion, and monitor initial layers to ensure stable feeding. After printing, allow parts to cool gradually before removal to reduce residual stress.

Recommendations

To reduce warping and improve interlayer bonding, print ABS at manufacturer-recommended nozzle and bed temperatures, use a heated bed with adhesive or PEI surface, and consider an enclosed build area. Store unused filament in a dry container or sealed bag with desiccant to prevent moisture absorption that can affect print quality.