3D-tulostimen filamentti FlashForge PLA 1,75 mm Nebula lila 1 kg

FlashForge PLA filament 1.75 mm in Nebula Purple is a 1 kg spool formulated for FDM 3D printers that accept PLA. The material offers the common advantages of PLA: low tendency to warp, smooth extrusion at standard desktop printing temperatures, and reliable layer adhesion. The Nebula Purple color provides a consistent, saturated tone suitable for visible parts, prototypes and decorative objects without special printing environment requirements.

Advantages

This FlashForge PLA filament prints at typical PLA temperature ranges and is compatible with most machines that use 1.75 mm filament. It delivers predictable dimensional stability for small to medium models, good surface finish with standard nozzle sizes, and minimal odor during printing. The spool size and filament diameter ensure steady feed and reduced risk of jamming when the printer is properly calibrated.

Suitable for

• Concept models and functional prototypes for visual evaluation
• Hobby and cosplay parts that require a consistent purple color
• Decorative items, household accessories and display pieces
• Educational projects and classroom printing where ease of use is important

Key specifications

• Material: Polylactic Acid (PLA)
• Filament diameter: 1.75 mm
• Spool weight: 1 kg
• Color: Nebula Purple
• Compatibility: FDM/FFF 3D printers accepting PLA filament

How to use

Load the 1.75 mm filament into the printer according to the manufacturer’s filament-loading procedure and set the nozzle temperature to the typical PLA range. Recommended print settings commonly start with a nozzle temperature between 190–220 °C and a heated bed temperature of 0–60 °C depending on adhesion method. Calibrate extrusion multiplier and print speed for optimal layer bonding and surface quality. Store the spool in a dry place or sealed container with desiccant when not in use to maintain filament quality.

Recommendations

For best results, print test cubes and fine-tune retraction, print speed and cooling to reduce stringing and improve surface finish. Use standard PLA supports and adjust bed adhesion (brim or glue) when printing larger flat parts.