3D-tulostin AnyCubic Kobra 3 V2 (K3V2-IP-O) — rakennustila 235×235×250 mm

Anycubic Kobra 3 V2 is a desktop FDM 3D printer designed for precise, fast prototyping and small-series production. It features the LeviQ 3.0 automatic leveling system, a capacitive 4.3-inch touchscreen and compatibility with PLA, TPU, PETG and ABS. With a build volume of 255 x 255 x 260 mm, maximum nozzle temperature of 300℃ and a maximum heated bed temperature of 110℃, the Kobra 3 V2 supports practical, everyday 3D printing tasks. The printer integrates into the Anycubic ecosystem for remote control, slicing and timelapse documentation via its built-in 720p camera.

Advantages

The LeviQ 3.0 automatic leveling with eliminated Z-axis offset and SG15 bearings ensures consistent first-layer adhesion and reduces print failures. High motion performance — up to 600 mm/sec maximum speed and 20,000 mm/s² acceleration — decreases print time for many models. Plug & play assembly enables initial setup in under 15 minutes, while features such as filament detection, automatic resume after power loss and a built-in 720p timelapse camera provide reliable operation and process documentation. The printer offers multiple control options (panel, Anycubic app, Anycubic Slicer Next or USB) and a range of nozzle diameters (standard 0.4 mm; 0.25/0.6/0.8 mm optional).

Key specifications

• Manufacturer: Anycubic
• Model: K3V2-IP-O (Kobra 3 V2)
• Build volume: 255 x 255 x 260 mm
• Printer dimensions: 452.9 x 504.7 x 483 mm
• Weight: 9.37 kg
• Supported materials: PLA, TPU, PETG, ABS
• Nozzle maximum temperature: 300℃
• Maximum heated bed temperature: 110℃
• Maximum print speed: 600 mm/sec (default 300 mm/sec)
• Acceleration: up to 20,000 mm/s²
• Touchscreen: 4.3-inch capacitive
• Auto leveling: LeviQ 3.0 with no Z-axis offset
• Nozzle diameters: 0.4 mm standard; 0.25 / 0.6 / 0.8 mm optional
• Filament detection and automatic resume after power loss: supported
• Camera: built-in HD camera, supports 720P and timelapse
• Power: 400 W
• Multicolor printing and active drying: ACE Pro required
• Control and printing methods: onboard panel, Anycubic Slicer Next, Anycubic app, USB (print only)

How to use

Unpack the Anycubic Kobra 3 V2 and follow the quick-start steps: mount the print head and spool holder, connect cables and power, and run the automatic LeviQ 3.0 leveling procedure. Use Anycubic Slicer Next (LAN or local) to prepare models and select material profiles for PLA, TPU, PETG or ABS. Load filament and verify filament detection, set nozzle and bed temperatures according to material, then start printing from the touchscreen, app or USB. If power is interrupted or filament runs out, the printer can automatically resume the job once conditions are restored.

Recommendations

For reliable multicolor printing or active filament drying use the ACE Pro accessory. Use the included sample filament to confirm initial settings, and keep nozzle cleaner and grease from the kit for routine maintenance. For complex geometries prefer PETG or ABS with appropriately adjusted temperature and cooling settings, and monitor the first layer adhesion after automatic leveling.