3D-tulostusfilamentti Creality PLA Hyper Carbon violetti 1,75 mm 1 kg

Creality PLA Hyper Carbon Violet is a 1 kg roll of 1.75 mm PLA filament formulated for standard FDM/FFF 3D printers. The material combines the ease of printing associated with PLA with a distinctive violet hyper carbon surface finish that suits visual models, prototypes and decorative parts. The filament is wound on a standard spool for reliable feeding and is intended for users who need consistent diameter and low-warp performance during routine printing tasks.

Advantages

The filament provides good layer adhesion and prints at typical PLA temperatures, reducing the need for a heated enclosure. Its hyper carbon violet finish offers enhanced aesthetic appeal for visible parts while maintaining the printability and post-processing characteristics of PLA, such as easy sanding and painting. The 1.75 mm diameter is compatible with a wide range of consumer and prosumer FDM/FFF printers, and the 1 kg spool supplies sufficient material for multiple medium-sized prints.

Suitable for

• Visual prototypes and concept models
• Hobbyist figurines and decorative objects
• End-use parts with moderate mechanical requirements
• Educational projects and classroom printing
• Post-processed painted or sanded models

Key specifications

• Material type: PLA (polylactic acid)
• Filament diameter: 1.75 mm
• Net spool weight: 1 kg
• Surface finish: hyper carbon violet
• Typical printing method: FDM/FFF

How to use

Load the filament into the extruder of a compatible 1.75 mm FDM/FFF printer following the printer manufacturer’s filament-loading procedure. Use common PLA print settings: nozzle temperature in the typical PLA range (refer to your printer and filament supplier recommendations), bed temperature as required for adhesion, and moderate print speeds for best surface quality. Allow prints to cool before removal to reduce warping and perform standard post-processing such as trimming, sanding or painting as needed.

Recommendations

Store the spool in a dry environment or sealed container with desiccant to minimize moisture absorption. If the filament shows signs of moisture (brittleness or increased stringing), dry according to recommended filament-drying procedures before printing. Calibrate filament extrusion multiplier and retraction settings for optimal dimensional accuracy and surface finish with the hyper carbon violet material.