3D-tulostusmateriaali Creality 3D 3301030033 polyeteenitereftalaattiglykoli keltainen 1 kg

Creality 3D 3301030033 Polyethylene Terephthalate Glycol (PETG) Yellow 1 kg is a filament designed for fused filament fabrication 3D printers. With a nominal diameter of 1.75 mm and a 1 kg spool weight, this PETG filament offers a balance of tensile strength, impact resistance and dimensional stability. The vivid yellow colour provides good visual contrast for prototypes and finished parts, while the compact packaging dimensions (210 mm x 210 mm) support convenient storage and handling.

Advantages

This PETG material combines mechanical robustness with ease of printing: it exhibits low warping and good layer adhesion, reducing failed prints and rework. It delivers higher toughness than PLA and better chemical resistance than standard ABS, making printed parts more durable in everyday use. The consistent filament diameter and quality control result in steady extrusion and predictable print outcomes when used with Creality 1.75 mm extruders.

Suitable for

• Functional prototypes and end-use parts requiring toughness and impact resistance
• Mechanical components, brackets and housings
• Visual models, signage and colour-coded parts
• Educational projects and hobbyist printing with Creality 3D printers

Key specifications

• Material type: Polyethylene Terephthalate Glycol (PETG)
• Filament diameter: 1.75 mm nominal
• Weight: 1 kg spool
• Colour: Yellow
• Packaging dimensions: 210 mm x 210 mm

How to use

Load the 1.75 mm PETG filament into a compatible Creality extruder following the printer manufacturer’s filament loading procedure. Recommended printing settings typically include a nozzle temperature in the range of 230–250 °C and a heated bed temperature around 70–90 °C; actual temperatures should be adjusted based on printer model, ambient conditions and part geometry. Use moderate print speeds and enable retraction settings suitable for PETG to minimise stringing. Store the filament in a dry environment or sealed container with desiccant to preserve printability.

Recommendations

For best results, print PETG on a clean build surface such as glass with an appropriate adhesion aid (e.g., glue stick or PET tape) and allow first layers to cool slightly before increasing fan speed. Calibrate extrusion multiplier and flow to ensure dimensional accuracy, and consider enabling a skirt or brim for small parts to improve bed adhesion.