ACT oranssi 10 metrin U/UTP CAT6 -verkkokaapeli snagless ja RJ45-liittimillä

The ACT Orange 10 meter U/UTP CAT6 snagless patch cable features full copper conductors and meets ANSI/TIA-568-C2-1 performance requirements. Designed for CAT6 networks, this orange 10 m patch cable includes snagless boots and gold-plated RJ-45 connectors to provide stable, high-speed data transmission. The cable is compatible with CPR Euroclass Eca and is intended for use in structured copper data networks and Power over Ethernet (PoE) applications where full copper conductors are required.

Advantages

This ACT CAT6 patch cable uses full copper conductors for reliable signal integrity and optimal performance in Ethernet and PoE installations. The snagless design protects the connector latch during installation in patch panels and crowded cable runs, while gold-plated RJ-45 contacts ensure good corrosion resistance and consistent connectivity. Compliance with ANSI/TIA performance criteria and CPR Euroclass Eca supports predictable, long-term network operation.

Suitable for

• Structured copper LAN installations (CAT6)
• Power over Ethernet (PoE) devices and endpoints
• Patch panels, switches and routers in office or data closet environments
• Temporary or permanent cable runs where cable identification is helpful (orange color)

Key specifications

• Length: 10 m
• Cable category: U/UTP CAT6
• Conductors: full copper
• Connectors: RJ-45 to RJ-45, gold-plated contacts
• Design: snagless boot
• Colour: Orange
• Standards: ANSI/TIA-568-C2-1; CPR Euroclass: Eca
• Brand/Model: ACT, MPN IS1510; EAN 8716065255072

How to use

Connect one RJ-45 end of the patch cable to a network port on a switch, router or patch panel and the other end to a workstation, IP phone, access point or another network device. Ensure connectors are fully inserted until the latch clicks. Route the cable to avoid sharp bends, excessive tension and sources of electromagnetic interference. For installations in racks or cabinets, use the snagless boot to ease insertion and removal from patch panels.

Recommendations

Use this CAT6 full-copper patch cable for PoE-powered equipment and in any CAT6 copper LAN where consistent performance is required; avoid running alongside high-voltage power lines and maintain bend radius recommended for CAT6 cabling to preserve signal quality.