ACT pinkki 1,5 m LSZH SFTP CAT6A -verkkokaapeli, rastnasenfrei, RJ45-liittimillä

The ACT Pink 1.5m LSZH SFTP CAT6A patch cable is a 1.5 meter networking cable with snagless RJ-45 connectors and S/FTP shielding. It uses full copper AWG#26 conductors and 50µ gold-plated RJ-45 contacts to maintain signal integrity and reliable high-speed data transfer. The LSZH (low smoke zero halogen) jacket reduces toxic fumes in case of fire, and the cable is 100% tested with ACT specifications verified by an independent certification institute.

Advantages

The cable combines S/FTP shielding and 50µ gold contacts for improved resistance to electromagnetic interference and consistent conductivity. Full copper AWG#26 conductors provide stable transmission characteristics, while the snagless RJ-45 connectors protect the plug latch during installation. The LSZH outer jacket minimizes harmful smoke and halogen release, and the product undergoes complete testing with certification validation.

Suitable for

• Office and data center patching where CAT6A bandwidth is required
• High-speed Ethernet connections (10 Gigabit Ethernet over short distances)
• Environments needing low-smoke, halogen-free cabling
• Applications sensitive to electromagnetic interference (shielded runs)

Key specifications

• Brand: ACT
• Model / MPN: FB8851
• EAN: 8716065314427
• Cable type: S/FTP CAT6A
• Cable length: 1.5 m
• Conductors: full copper AWG#26
• Contacts: 50µ gold-plated RJ-45
• Connectors: RJ-45 to RJ-45, snagless
• Jacket: LSZH (Low Smoke Zero Halogen)
• Testing and certification: 100% tested; ACT specifications verified by independent institute

How to use

Connect one RJ-45 end of the patch cable to your network device (switch, router, patch panel or computer) and the other end to the corresponding port. Ensure connectors are fully inserted until the latch clicks. Route the cable without sharp bends and avoid tight bundling near high-power cables to preserve shielding and performance. For best results, use within typical office or data center patching distances for CAT6A cabling.

Recommendations

For maximum reliability, avoid repeated flexing near the connector ends and maintain bend radius per CAT6A guidelines. Replace the cable if the jacket or connectors show visible damage. Use in shielded installations with proper grounding to benefit from S/FTP shielding.