ACT Powercord virtajohto CEE 7/7 pistoke (kulma) - C15 vihreä 1,5 m

The ACT Powercord CEE 7/7 male angled to C15 coupler is a 1.5 m power cable designed for 230 V, 10 A use. It features a CEE 7/7 angled mains plug on one end and an IEC C15 coupler on the other, fitted on an H05RN-F type flexible rubber cable. The green colour and robust construction make it suitable for equipment where higher temperatures may occur and for powering network switches and similar devices.

Advantages

This powercord combines a CEE 7/7 angled plug with an IEC C15 coupler to allow safe connection of devices requiring the C15 inlet at up to 10 A and 230 V. The H05RN-F cable offers flexibility and durability, and the angled mains plug can reduce strain in tight installations. The green colour helps with easy identification in multi-cable environments.

Suitable for

• Powering network switches and small rack devices with a C15 inlet
• Equipment that may run at higher temperatures where C15 is specified
• Installations requiring a 1.5 m angled mains connection to a C15 device

Key specifications

• Connector 1: CEE 7/7 angled mains plug
• Connector 2: IEC 60320 C15 coupler
• Cable length: 1.5 m
• Rated voltage/current: 230 V, 10 A
• Cable type: H05RN-F (flexible rubber cable)
• Product colour: Green
• Brand: ACT, MPN: AK5296, EAN: 8716065509311

How to use

Connect the CEE 7/7 angled plug to a compatible mains outlet and insert the C15 coupler into the device inlet designed for IEC C15. Ensure the contacts are fully engaged and that the cable is routed to avoid sharp bends or pinch points. Confirm the device's rated current does not exceed 10 A and observe standard electrical safety procedures during installation and use.

Recommendations

Use this cable for devices specifying an IEC C15 inlet or when equipment is expected to run at elevated temperatures. Inspect the cable and connectors before each use and replace if any damage or excessive wear is visible.