ACT sininen 1,5 m LSZH U/UTP CAT6 Datacenter Slimline -verkkokaapeli ilman salpaa RJ45-liittimillä

The ACT Blue 1.5m LSZH U/UTP CAT6 patch cable is a slimline Ethernet cable designed for datacenter and high-density network environments. With a reduced diameter compared to standard CAT6 cords and LSZH jacket material, it supports high-speed data transmission while limiting smoke emission in case of fire. The cable uses U/UTP construction and snagless RJ-45 connectors, and its slim profile improves airflow and simplifies routing in tight cabinet spaces.

Advantages

The slim 3.8 mm diameter lowers the bending radius and reduces cable bulk versus regular CAT6 patch cords, improving rack airflow and space utilization. The LSZH jacket minimizes hazardous smoke output. Snagless RJ-45 connectors protect the plug latches during installation. U/UTP construction reduces interference for reliable network performance. ACT notes that using 28 AWG construction may increase attenuation at higher frequencies, so link length considerations have been adjusted accordingly.

Suitable for

• Datacenter patching and high-density network cabinets
• Short-to-medium length Ethernet connections (1.5 m) between devices and switches
• Environments requiring low-smoke (LSZH) cable jackets
• Installations where improved rack airflow and tight routing are needed

Key specifications

• Category: CAT6 U/UTP
• Length: 1.5 m
• Diameter (slimline): ~3.8 mm
• Connectors: RJ-45 to RJ-45, snagless
• Jacket: LSZH (Low Smoke Zero Halogen)
• Colour: Blue
• Brand / MPN / EAN: ACT / DC9651 / 8716065404562

How to use

Connect one RJ-45 end to the network device (switch, patch panel or NIC) and the other to the corresponding port. Use the snagless boots to insert and remove the cable without damaging the connector latch. Route the cable through the rack or cabinet, taking advantage of its slim profile to fit in tight spaces and maintain proper bend radius. For best performance, avoid sharp bends and physical damage to the cable.

Recommendations

ACT recommends shorter permanent link lengths than standard 24 AWG patchcords when using thinner 28 AWG constructions because of higher attenuation, especially at higher frequencies. In PoE deployments, limit bundled cable groups to a maximum of 24 cables to help control temperature rise; follow current standards (ANSI TSB-184-A) that limit the centre cable temperature increase to less than 15 °C above ambient.