ACT valkoinen 0,15 metrin LSZH U/FTP CAT6A datakeskuksen Slimline-patchkaapeli ilman lukituskynsiä RJ45-liittimillä

The ACT White 0.15m LSZH U/FTP CAT6A Patch Cable Snagless RJ45 is a slimline data centre patch cord with a 0.15 m length, white LSZH jacket and snagless RJ45 connectors. It uses U/FTP shielding and meets CAT6A electrical class for high-speed data transmission in rack and cabinet environments. The slimmer 3.8 mm diameter reduces cable bulk and improves airflow compared with standard CAT6A cords, while gold-plated contacts ensure reliable connections.

Advantages

The slimline 3.8 mm construction lowers bending radius and saves space in dense installations. The LSZH jacket limits smoke and toxic emissions for indoor use. U/FTP shielding helps control crosstalk and preserve signal integrity. Snagless RJ45 boots protect the connector clip during installation and gold-plated contacts provide corrosion resistance and reliable mating.

Suitable for

• Short patching in data centres and network cabinets
• High-density rack installations where airflow is critical
• Indoor deployments requiring low-smoke LSZH materials
• Connections between switches, patch panels and servers

Key specifications

• Length: 0.15 m
• Cable type: U/FTP, CAT6A, slimline (approx. 3.8 mm diameter)
• Jacket material: LSZH (low smoke, zero halogen)
• Connectors: RJ-45 to RJ-45, snagless boots, gold-plated contacts
• Colour: White

How to use

Route the patch cable between RJ-45 ports on switches, patch panels or servers, taking care to avoid sharp bends below the recommended bending radius. Use the snagless boot to prevent clip damage when inserting or removing the connector. For proper performance, ensure connectors are fully seated and compatible with CAT6A-rated ports.

Recommendations

Use slimline 32 AWG patch cords only where appropriate for short patching; thinner conductors increase attenuation, particularly at higher frequencies. For PoE deployments, limit bundled slimline cables to a maximum of 24 conductors to control temperature rise in accordance with ANSI TSB-184-A (center cable temperature increase < 15 °C above ambient).