ACT-virtakaapeli C14–C21 IEC60320 sininen 1 m, 250 V 10 A

ACT power cord with IEC60320 connectors C14 (inlet) to C21 (outlet) in blue, 1 m length. Rated for 250 V and 10 A, this cable is designed to supply power to compatible IT and power equipment such as PDUs, servers, UPS units and network devices that accept a C21 receptacle. The C21 connector is high-temperature resistant up to 155°C, and the cable features a flexible 1 mm² conductor for reliable mains delivery in rack and desktop installations.

Advantages

The cable provides a standard IEC60320 C14 to C21 connection suitable for many server and network applications, offers a compact 1 m length for tidy cable management, and uses a C21 connector rated for high temperatures up to 155°C. Its 250 V / 10 A rating and 1 mm² conductor support typical IT power requirements, and the blue colour helps with visual identification in multi-cable environments.

Suitable for

• Connecting servers and rack equipment that accept C21 inlets
• Powering PDUs, UPS units and network switches with C21 sockets
• Short cable runs in rack cabinets and desktop installations where 1 m length is sufficient

When it may not be suitable

This cable is not suitable for equipment requiring currents above 10 A or voltages exceeding 250 V. It is intended for use with devices that specifically use an IEC60320 C21 inlet; it will not fit proprietary or non-IEC connectors. For longer runs, higher current requirements or different connector types, choose a cable with appropriate length, conductor size and connector standard.

Key specifications

• Cable length: 1 m
• Connectors: IEC60320 C14 (male inlet) to C21 (female outlet)
• Voltage and current rating: 250 V~, 10 A
• High-temperature resistance at C21 connector: up to 155°C
• Conductor cross-section: 1.0 mm²
• Colour: blue

How to use

Insert the C14 end into the power source or PDU inlet and connect the C21 end to the equipment's C21 receptacle. Ensure both connectors are fully seated and that the cable is routed to avoid sharp bends or strain. Use the 1 m length for close-proximity connections within racks or on desktops and confirm the connected device does not exceed the cable's 250 V / 10 A rating.

What to consider before purchase

• Verify your equipment has a C21 inlet and that a C14-to-C21 cable is the correct connector pairing
• Confirm the device's current draw does not exceed 10 A and that 250 V is appropriate for your mains
• Consider whether 1 m length and blue colour meet your installation and identification needs

Recommendations

Use this blue ACT C14 to C21 IEC60320 cable for short, rack-mounted or desktop connections to servers, PDUs and UPS units with C21 inlets. Avoid overloading beyond 10 A and ensure secure, strain-free routing to maintain reliable power delivery.