Anycubic Standard V2 1kg hartsia HD harmaa

For makers who want a dependable everyday photopolymer without sacrificing detail, the Anycubic Standard V2 resin in HD Grey delivers a balanced blend of resolution, speed, and mechanical strength. Unlike many budget resins that trade surface quality for toughness, this formulation keeps edges crisp and surfaces smooth while remaining robust enough for functional prototypes. The neutral grey tone reveals layer lines and uncured residue clearly, making calibration and inspection faster in any workflow.

Highlights

• UV curing photopolymer resin for LCD and DLP 3D printers
• HD Grey colour provides excellent surface detail and contrast
• 1 kg (1000 ml) net volume for extended printing sessions
• Low viscosity for easy handling and consistent layer formation
• Low odour formulation improves the working environment
• Mechanically robust: 83D Shore hardness, 40 MPa tensile strength

In daily use

This resin prints accurate parts with sharp edges and smooth surfaces. The grey tint makes it easy to spot uncured areas or surface imperfections, which is helpful when calibrating exposure settings or checking print quality. After printing, simply rinse parts in ethanol or isopropyl alcohol, then post-cure them for maximum durability. It is compatible with most LCD and DLP printers operating in the 365–405 nm wavelength range.

Full specifications

• Type: UV Curing Photopolymer Resin
• Net Volume: 1000 ml (1 kg)
• Colour: HD Grey
• Curing Wavelength: 365–405 nm
• Density: 1.1 g/cm³
• Viscosity: 200 mPa·s (at 25°C)
• Shore Hardness: 83D
• Tensile Strength: 40 MPa
• Elongation at Break: 12%
• Flexural Strength: 50 MPa
• Flexural Modulus: 2.0 GPa
• Shrinkage: <4.5%
• Recommended Bottom Exposure: 20-60s (printer dependent)
• Recommended Normal Exposure: 1.5-3s (printer dependent)
• Printer Compatibility: LCD/DLP 3D Printers
• Application: General purpose, high-detail models, prototyping
• Wash Method: Ethanol or Isopropyl Alcohol (IPA)
• Storage Conditions: Cool, dry, dark place (15-35°C)
• Odor: Low
• Post-Curing: Recommended for optimal strength

Final note

From miniatures to mechanical parts, the Anycubic Standard V2 HD Grey resin keeps your prints consistent and your workspace comfortable—a reliable staple for any resin printing setup.