Arenti O3 WiFi 4MP 2.5K -valvontakamera

Arenti O3 WiFi 4MP 2.5K outdoor camera combines 2.5K (2560x1440) resolution, 4MP CMOS sensor and weather-resistant housing to provide continuous outdoor monitoring. The camera supports Wi‑Fi connectivity, color night vision, intelligent motion detection, two‑way audio and flexible storage options including TF card, cloud and NVR integration. It is designed for simple installation and remote management via a mobile app compatible with iOS and Android.

Advantages

The Arenti O3 delivers sharp 2.5K video and digital WDR for improved detail in challenging light conditions. Color night vision and an infrared range up to 10 meters help preserve usable footage in low light. Built‑in microphone and speaker enable two‑way communication. The housing meets IP65 for protection against rain and dust and operates between -20°C and 50°C. Storage is flexible with support for TF cards up to 256 GB, cloud backup and NVR. Power is supplied via USB‑C (DC 5V/1A) with low power consumption up to 2.5 W.

Suitable for

• Monitoring house entrances and driveways
• Securing yards, porches and outdoor common areas
• Remote observation of small business perimeters
• Continuous surveillance in temperate and cold climates

Key specifications

• Manufacturer: Arenti; Model: O3
• Image sensor: 1/3" CMOS, 4 MP; Maximum resolution: 2560 x 1440 (2.5K)
• Lens: 3.6 mm @ F1.6; Field of view: H 85° / V 45° / D 95°
• Day/Night: Auto (ICR) / Color / B/W; Minimum illumination: Color 0.1 Lux @ F2.0, B/W 0.01 Lux @ F2.0
• Infrared range: up to 10 m; WDR: Digital WDR
• Video compression: H.265; Frame rate: 1–20 fps; Bandwidth: 32 Kbps–2 Mbps; Dual stream: Yes
• Audio: Built‑in microphone and speaker; Two‑way audio supported
• Connectivity: Wi‑Fi 2.4 GHz (IEEE802.11b/g/n/ax); Protocols: Arenti private protocol, RTSP
• Security: WPA/WPA2, WPA‑PSK/WPA2‑PSK, WPS; Data encryption: AES128
• Storage: TF card up to 256 GB, cloud, NVR
• Power: DC 5V/1A via USB‑C; Power consumption: up to 2.5 W
• Operating temperature: -20°C to 50°C; Weather resistance: IP65
• Dimensions: 58 x 58 x 156 mm; Net weight: 124 g

How to use

Install the Arenti O3 on a stable surface or mount using the included screws and silicone cover. Connect power using the supplied adapter and USB‑C cable. Set up the camera in the Arenti mobile app on an iOS or Android device, follow in‑app pairing instructions to join a 2.4 GHz Wi‑Fi network, and configure recording preferences. Define monitoring zones and motion sensitivity in the app, enable cloud or local TF card storage as needed, and verify two‑way audio and notification settings.

Recommendations

Place the camera at a height and angle that avoids direct sunlight and minimizes obstructions for the 85° horizontal field of view. Use a high‑quality TF card (up to 256 GB) formatted in the app for reliable local recording, and enable cloud backup if continuous off‑site storage is required. Ensure the camera is connected to a stable 2.4 GHz Wi‑Fi network and keep firmware and app updated for best performance.