Ares IFT Evolve 300 CX -helikopteri, vastaanotin valmiina

The ARES Evolve 300 CX Ready-For-Receiver is a coaxial helicopter that offers maximum stability and automatic obstacle avoidance thanks to its counter-rotating rotor design and exclusive C.A.T. anti-collision system with ultrasonic sensors. Significantly larger than typical micro helicopters, it can be controlled precisely indoors and outdoors in winds of up to 16 km/h. The 100% factory-assembled model is equipped with two powerful 370-size motors, a 3-in-1 control unit, 7.5-gram digital sub-micro servos and a distinctive scale canopy. For the first flight, an 800 mAh 3S 11.1 V LiPo battery and compatible charger are required, in addition to the receiver for the preferred radio system.

Key features

• Coaxial, counter-rotating rotor design
• C.A.T. system with ultrasonic sensors for automatically avoiding collisions with obstacles
• For outdoor flying in winds of up to 16 km/h
• Factory-installed C.A.T. system in the RFR and RTF versions
• Factory-assembled and test-flown, with a painted scale canopy
• Two powerful 370-size motors, 3-in-1 control unit and digital 7.5-gram sub-micro servos; powered by an 800 mAh 3S 11.1 V LiPo battery
• C.A.T. software offers selectable modes for larger and smaller indoor spaces; the system can be switched on and off via the radio control
• Controllable precisely indoors and outdoors; significantly larger than typical ultra-micro and micro helicopters in the CX class
• Also available as an RTF version

Specifications

• Charger: DC 3S 11.1 V LiPo charger with balancer and AC adapter (included with RTF, required for RFR)
• On-Board Electronics: Receiver (included with RTF, required for RFR); advanced 3-in-1 control unit with 2 × ESC/mixer/gyro, digital 7.5-gram sub-micro servos and C.A.T. module with ultrasonic sensors (installed in RTF/RFR)
• Length: 465 mm
• Height: 265 mm
• Main rotor diameter: 460 mm
• Weight with battery: 455 g
• Main motor: 370-size (2 pcs)
• Battery: 800 mAh 3S 11.1 V LiPo (included with RTF, required for RFR)
• Radio system: 5-channel 2.4 GHz (included with RTF, required for RFR)

Notes: additionally required for the RFR version: receiver, 800 mAh 3S 11.1 V LiPo battery, DC 3S 11.1 V LiPo charger with balancer and AC adapter, and 5-channel 2.4 GHz radio system. C.A.T. does not automatically prevent collisions with all obstacles; further information is provided in the instruction manual.