Mesh-paketti 4200 dualband (2,4 GHz / 5 GHz) Wi-Fi 6E (802.11ax) punainen, valkoinen 2x2/4x4

The FRITZ!Repeater Mesh Set 4200 Dual-band Wi-Fi 6E is a network repeater set designed to extend and stabilize wireless coverage in homes and small offices. Supporting Wi‑Fi 6E (802.11ax) and dual-band operation on 2.4 GHz and 5 GHz, the device provides a combined theoretical maximum data transfer rate of up to 4200 Mbit/s. The repeater integrates internal 2x2/4x4 antenna design and a Gigabit Ethernet LAN interface for wired connections, and is compatible with common IEEE 802.11 standards including a, ac, ax, g and n.

Advantages

The FRITZ!Repeater Mesh Set 4200 improves signal reach and reduces dead zones by extending an existing Wi‑Fi network while maintaining a single SSID for seamless roaming within the mesh. Dual‑band support with Wi‑Fi 6E technology enables higher throughput and more efficient multi‑device handling compared with earlier standards. The built‑in Gigabit Ethernet port allows devices that require wired connectivity to be integrated into the extended network, and the internal antenna configuration is optimised for balanced coverage. The unit’s compact design and white/red colour scheme suit residential and office environments.

Suitable for

• Extending Wi‑Fi coverage in multi‑room homes and small offices
• Improving wireless performance for streaming, video calls and online gaming
• Providing wired network access for a single device via Gigabit Ethernet
• Integrating into a mesh network for seamless roaming between access points

Key specifications

• Top Wi‑Fi standard: Wi‑Fi 6E (802.11ax)
• Wi‑Fi bands: Dual‑band (2.4 GHz / 5 GHz)
• Maximum WLAN data transfer rate: 4200 Mbit/s (combined theoretical)
• Antenna type: internal 2x2/4x4 configuration
• Ethernet interface: Gigabit Ethernet LAN port for wired devices
• Compatibility: IEEE 802.11a, ac, ax, g, n
• Product colour: white and red

How to use

Unbox the FRITZ!Repeater Mesh Set 4200 and position the repeater midway between your primary router and the area with weak signal to ensure reliable backhaul. Power the unit and connect a computer to the Gigabit Ethernet port if initial configuration via wired setup is preferred. Use the FRITZ!box or the device’s web/installation interface to add the repeater to your existing network; follow on‑screen instructions to enable mesh functionality and unify SSID and network settings. After setup, test wireless coverage and, if necessary, adjust the placement for optimal signal distribution.

Recommendations

The repeater performs best when placed where it still receives a strong signal from the main router; avoid locating it in enclosed metal cabinets or near large appliances that cause interference. For mesh operation, use the same manufacturer’s mesh‑capable router when possible, and keep firmware up to date to maintain compatibility and security.