Barrow Dazzle adapteri TDWT45-B01 SS 45° G1/4" ulkokierre G1/4" sisäkierteeseen kierrettävä hopea

Barrow Dazzle Adapter TDWT45-B01 SS is a 45° rotatable adapter designed for PC liquid-cooling systems. Made from stainless steel with a silver finish, it converts a G1/4" male thread to a G1/4" female thread while allowing a 45-degree angular change. The rotatable joint enables precise alignment of fittings and tubing, reducing stress on hoses and simplifying neat routing inside compact or densely populated cases.

Advantages

The stainless steel construction ensures mechanical strength and resistance to corrosion in closed-loop cooling environments. The 45° angle and rotatable joint provide flexibility for tight installations and awkward connector positions. Machined G1/4" threads offer compatibility with standard water-cooling fittings and secure, leak-resistant connections when properly installed. The compact form factor minimizes space usage while enabling smoother bends and reduced kinking of soft tubing.

Suitable for

• Custom PC water-cooling loops requiring angled hose routing
• Connections between radiators, pumps, reservoirs, and water blocks in confined spaces
• Upgrading or replacing straight fittings to improve tubing alignment
• Builds using standard G1/4" threaded fittings and components

Key specifications

• Angle: 45° rotatable joint
• Thread type: G1/4" male to G1/4" female
• Material: stainless steel (silver finish)
• Compatibility: standard G1/4" water-cooling fittings
• Form factor: compact angled adapter for tight spaces

How to use

Hand-start the G1/4" male thread into the mating G1/4" female component, then tighten with an appropriate wrench until snug; avoid over-tightening to prevent thread damage. Position the adapter to the desired 45° orientation using the rotatable joint before final tightening. Verify sealing by applying the appropriate gasket or O-ring on the mating fitting if required by your system, and perform a pressure or leak test after assembly before powering the system.

Recommendations

Use with compatible G1/4" fittings and tubing; check material compatibility with your coolant. When routing soft tubing, ensure the bend radius is within the tubing's specification to avoid kinking. Inspect threaded seals and O-rings periodically and retest for leaks after system maintenance or reconfiguration.