BitsPower X-Cross sovitin G1/4" ulkokierre G1/4" sisäkierteeseen, 5 mm siirto, kiiltävä musta

BitsPower X-Cross G1/4" male to G1/4" female adapter provides a compact 5 mm lateral offset between a standard G1/4" male and G1/4" female thread. Finished in glossy black metal, this adapter is designed for use in PC liquid-cooling systems and custom tubing assemblies where slight repositioning of a fitting is required to avoid contact with nearby components or to achieve a cleaner line routing. The solid construction supports standard G1/4" fittings and maintains a sealed connection for coolant flow.

Advantages

The adapter offers a small 5 mm offset that enables precise alignment without introducing significant additional length. Its glossy black metal finish gives a discreet appearance that matches common water-cooling hardware and reduces visual clutter. The compact size minimizes impact on available space inside a case while preserving thread compatibility with standard G1/4" fittings. The metal construction ensures durability and reliable sealing when installed correctly.

Suitable for

• PC water-cooling loops where a fitting needs slight lateral repositioning
• Custom rigid or soft tubing builds requiring clearance around connectors
• Routing coolant lines to avoid contact with other components or chassis panels
• Adapters between blocks, radiators, pumps, or reservoirs with G1/4" threads

Key specifications

• Thread standard: G1/4" male to G1/4" female
• Offset: 5 mm lateral displacement
• Finish: glossy black
• Material: metal construction suitable for liquid-cooling use
• Size: compact form factor to minimize spatial impact

How to use

Thread the male end of the adapter into the corresponding female G1/4" port or fitting by hand, then tighten with an appropriate wrench until a secure, leak-free connection is achieved; avoid overtightening to prevent damage to threads. Install the complementary G1/4" fitting onto the female side of the adapter and ensure any used seals or O-rings are present and correctly seated. After assembly, perform a pressure or leak test according to standard water-cooling practices before powering the system.

Recommendations

Use thread sealant or PTFE tape sparingly on the male threads if additional sealing is required, and verify compatibility of sealants with coolant types. When routing tubing, account for the 5 mm offset to plan clearance and bending radii. Periodically inspect fittings for tightness and signs of corrosion or wear, especially after cycling the system.