BlueOptics 10G Ethernet -verkkokeskitin 2x SFP+ 10000 Mbit/s 1550 nm musta

The BlueOptics 10G Ethernet Media Converter 2x SFP+ 10000 Mbit/s 1550 nm Black converts electrical Ethernet signals to optical signals using two SFP+ fiber ports. It supports Ethernet LAN data rates of 10, 100, 1000 and 10000 Mbit/s and is designed for wired network extension with 10GBASE-ER fiber technology operating at a 1550 nm wavelength. The unit is compact, black in color and intended to bridge copper and fiber segments in unmanaged or managed networks where 10 Gbit/s connectivity is required over fiber.

Advantages

This media converter provides two SFP+ fiber ports for 10 Gbit/s connectivity while retaining a copper Ethernet interface for compatibility with existing equipment. It supports auto-negotiation between link speeds and auto-MDIX on the copper side to simplify cabling. Features such as link pass-through and fiber fault alert enable straightforward monitoring of link status, and the device accepts pluggable SFP+ transceivers for flexible fiber connector and reach options.

Suitable for

• Extending a copper Ethernet network to fiber for higher bandwidth or longer distances
• Connecting switches, servers or network appliances that require 10 Gbit/s fiber links
• Upgrading parts of an existing network to 10G without replacing the entire copper infrastructure

Key specifications

• Maximum data transfer rate: 10000 Mbit/s
• Ethernet LAN (copper) ports: 1 (RJ-45)
• Fiber ports: 2 (SFP+ compatible)
• Supported Ethernet LAN data rates: 10, 100, 1000, 10000 Mbit/s
• Optical wavelength: 1550 nm
• Maximum transfer distance (dependent on transceiver and fiber): 30 m
• Product colour: Black

How to use

Install compatible SFP+ transceiver modules into the two fiber ports and connect appropriate fiber cabling. Connect the copper Ethernet device to the RJ-45 port using an appropriate Cat cable. Power the media converter according to the manufacturer instructions and observe link status LEDs to confirm successful negotiation and link establishment. Use the provided manual for safety steps such as attaching ESD protection when handling optical transceivers and for detailed installation and cabling diagrams.

Recommendations

For reliable operation, use SFP+ transceivers and fiber cabling that match the required reach and the 1550 nm wavelength when applicable, and follow ESD precautions when inserting or removing transceivers. Verify compatibility of connected network equipment and consult the device manual for environmental and mounting guidelines.