BlueOptics 1700486F1-BO SFP+-lähetin-vastaanotinmoduuli 10000 Mbit/s kuitu

The BlueOptics 1700486F1-BO is an SFP+ fiber optic transceiver module designed for 10 Gbit/s network links. It supports a maximum data transfer rate of 10000 Mbit/s and is supplied in a compact silver housing with a lightweight build of approximately 20 g. The module is manufactured to meet CE, FCC and RoHS compliance and features a long mean time between failures (MTBF) of 1,000,000 hours, making it suitable for deployment in enterprise and service provider environments that require reliable high-speed fiber connections.

Advantages

The module offers a standard SFP+ interface for compatibility with a wide range of switches, routers and network equipment that accept small form-factor pluggable transceivers. Its 10 Gbit/s rated throughput supports bandwidth-intensive applications while the compact, lightweight metal housing simplifies installation and reduces port strain. Compliance with CE, FCC and RoHS ensures conformity with common regulatory and environmental requirements. The high MTBF rating indicates predictable long-term operation under normal conditions.

Suitable for

• 10 Gigabit Ethernet links over single-mode or multimode fiber (verify fiber type with connector and optics).
• Data center uplinks and server interconnects requiring SFP+ ports.
• Network edge and aggregation switches that accept SFP+ transceivers.
• Replacement or spare module for existing SFP+ compatible equipment.

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Product colour: Silver
• Weight: 0.02 kg
• Mean time between failures (MTBF): 1,000,000 hours
• Compliance: CE, FCC, RoHS

How to use

Install the BlueOptics SFP+ transceiver by inserting it into a compatible SFP+ port on the network device until it clicks into place, taking care to align the module with the port and to avoid excessive force. Connect the appropriate fiber optic cable and connector type for the module and the link distance required, and verify link status using the host device management interface or port LEDs. When removing the module, power down the port if recommended by the equipment vendor, release the latch or pull tab and withdraw the transceiver carefully to avoid damage to the connector and fiber.

Recommendations

Confirm compatibility with your switch or router model and the required fiber type (single-mode or multimode) before installation. Observe ESD precautions when handling the transceiver and store unused modules in protective dust caps and anti-static packaging. Monitor link status after installation and schedule periodic inspections of connectors and fiber for contamination or damage to maintain optimal performance.