BlueOptics SRX-XFP-10GE-LR-BO verkon lähetin-vastaanotinmoduuli 10000 Mbit/s 1310 nm

The BlueOptics SRX-XFP-10GE-LR-BO network transceiver module is a single-mode fiber optic XFP module designed for 10GBASE-LR applications. It supports a maximum data transfer rate of 10000 Mbit/s, operates at a wavelength of 1310 nm and uses an LC duplex optical connector. The module comes in a metal housing, has a compact lightweight design and requires a 3.3 V input voltage, making it suitable for integration into compatible network switches, routers and storage systems that accept XFP modules.

Advantages

This XFP transceiver offers compatibility with systems that support 10GBASE-LR XFP modules and follows MSA standards to ensure mechanical and optical interoperability. The metal housing provides mechanical robustness while the single-mode 1310 nm optics support long-reach links up to typical LR distances. The module's lightweight design and standard XFP interface simplify installation and replacement in existing network hardware.

Suitable for

Key specifications

How to use

Install the BlueOptics SRX-XFP-10GE-LR-BO into an available XFP slot on compatible network equipment while the device is powered down or per the vendor's hot-swap instructions. Connect an LC duplex single-mode fiber patch cable to the module and to the corresponding port on the remote device, observing transmit/receive orientation. Configure the network device to enable the XFP port and verify link status and speed in the device management interface. If supported by the host, enable and monitor digital diagnostics (DDM/DOM) for real-time operational parameters.

Recommendations

Use high-quality single-mode LC duplex patch cords and follow manufacturer guidelines for fiber handling, connector cleaning and ESD protection. Verify host support for 10GBASE-LR XFP modules and DDM/DOM functionality if remote diagnostics are required. For long-term reliability, ensure proper cooling and stable 3.3 V power supply within the host device.