Bosch 2 608 602 388 kulmahiomakoneen lisävaruste katkaisulaikka

Angle grinder accessory Bosch 2 608 602 388 is a multipurpose grinding and finishing disc with a diameter of 115 mm and a thickness of 2.5 mm. Designed for use on handheld angle grinders, the disc is suitable for working on metal and stainless steel (Inox) and is supplied as a single grey disc compatible with standard 22.23 mm bore machines.

Advantages

This Bosch accessory combines cutting, grinding and finishing in one disc, allowing you to switch less often between tools. The disc is formulated for use on metal and Inox, has low contaminant content (Fe/S/Cl < 0.1%) and is rated for a maximum circumferential speed up to 80 m/s depending on the grinder rpm and disc diameter. Its 22.23 mm bore fits common handheld angle grinders.

Suitable for

• Cutting thin metal sheets and bars
• Grinding and deburring steel and stainless steel (Inox)
• Surface finishing and preparation before welding or painting

Key specifications

• Diameter: 115 mm
• Bore diameter: 22.23 mm
• Thickness: 2.5 mm
• Material suitability: Metal and Inox (stainless steel)
• Max circumferential speed: up to 80 m/s (depending on rpm and disc diameter)
• Contaminant content: Fe/S/Cl < 0.1%
• Sold: single disc

How to use

Mount the disc on a compatible handheld angle grinder with a 22.23 mm arbor, ensuring the grinder is unplugged or battery removed. Tighten the flange securely, wear appropriate personal protective equipment (eye protection, gloves, hearing protection) and start the grinder at no-load to check for wobble. Use steady, even pressure while cutting, grinding or finishing; avoid excessive side pressure and do not exceed the maximum recommended speed of the disc.

Recommendations

Use this disc for metal and stainless steel tasks on hand-held angle grinders. Match the disc diameter and bore to your machine, observe the maximum circumferential speed, and replace the disc if damaged or excessively worn.