Bosch 2 608 656 014 pistosaha-/puukkosaha-/puukkosahanterä bimetaali 5 kpl

The Bosch 2 608 656 014 jigsaw blade is made from bimetal (BIM) for increased durability and is intended for cutting thicker sheet metal and profiles. It has a milled, side-set tooth design with a fine 1.8 mm (14 TPI) tooth spacing for fast, precise cuts in sheet metal 3–8 mm thick and in solid or closed/open profiles and pipes with diameters under 100 mm. The blade is classified as type S 922 BF and is suitable for use with compatible jigsaw models.

Advantages

This jigsaw blade combines bimetal construction with a milled side-set tooth geometry to deliver quick cutting performance and improved wear resistance. The fine 1.8 mm tooth spacing (14 TPI) provides clean, controlled cuts in thick sheet metal and in solid or tubular profiles below 100 mm diameter, reducing the need for secondary finishing.

Suitable for

• Thick sheet metal cutting (3–8 mm)
• Solid profiles and pipes with diameter <100 mm
• Closed and open profiles and tubes with diameter <100 mm

Key specifications

• Material: Bimetal (BIM)
• Tooth design: side set, milled
• Tooth spacing: 1.8 mm / 14 TPI
• Application range: sheet metals 3–8 mm; solid/closed/open profiles <100 mm
• Type: S 922 BF

How to use

Fit the Bosch 2 608 656 014 blade into a compatible jigsaw according to the tool manufacturer’s mounting instructions, ensuring the teeth point in the correct cutting direction. Secure the blade clamp and set an appropriate cutting speed for metal work. Use steady feed pressure and keep the workpiece clamped to avoid vibration. For curved cuts in profiles, follow gradual, controlled movements to maintain blade life and cut quality.

Recommendations

Use cutting lubricant or coolant when working on thicker metals to extend blade life and improve cutting speed. Replace the blade when tooth wear or bending affects cut quality.