Bosch 2 608 656 015 pistosaha-/kuviosaha-/puukkosahanterä bimetal 5 kpl

The Bosch 2 608 656 015 jigsaw blade S 922 EF is intended for cutting thin sheet metals and small-diameter profiles and pipes. Made of BIM material with a side-set, milled tooth design and 1.4 mm tooth spacing (18 TPI), it is suitable for precise metal cutting tasks where a narrow kerf and controlled cut are required.

Advantages

The blade’s BIM construction combines durability and wear resistance for metal cutting. Side-set milled teeth and 1.4 mm (18 TPI) tooth spacing deliver fine, controlled cuts in thin sheet metal and in profiles or pipes with diameters below 100 mm. The S 922 EF tooth geometry is optimized for cutting thin materials with reduced burr and improved cut quality.

Suitable for

Key specifications

How to use

Install the jigsaw blade according to your jigsaw manufacturer’s instructions and ensure it is properly secured before operation. Use appropriate cutting speed and steady feed when cutting thin sheet metal or small-diameter profiles to avoid overheating and ensure a clean cut. Support the workpiece to minimise vibration and distortion during cutting.

Recommendations

Use personal protective equipment (gloves, safety glasses) and clamp the workpiece securely. For best results on thin sheet metal (1.5–4 mm) select moderate stroke rate and avoid excessive pressure; let the blade cut at its intended speed. Inspect the blade regularly for wear and replace if teeth are damaged or cutting quality deteriorates.