Bosch 2 608 656 027 pistosaha-/leikkaus-/puukkosahanterä bimetalli 100 kpl

The Bosch 2 608 656 027 sabre saw blade is a bimetal cutting blade designed for use with reciprocating saws when cutting pipes and profiles. With a 1.8 mm tooth spacing and the ability to cut material thicknesses up to 100 mm, this blade is intended to provide long life and consistent cutting performance across a variety of common construction and renovation materials. Supplied as a single blade per pack, it is suitable for situations where a durable, general-purpose metal‑cutting blade is required.

Advantages

The bimetal construction combines high-speed steel teeth with a flexible backing, offering improved resistance to wear and reduced risk of tooth breakage compared with plain carbon-steel blades. The 1.8 mm tooth pitch balances cutting speed and finish, enabling efficient removal of material while maintaining control when cutting profiles and pipes. The blade’s design supports cutting thicknesses up to 100 mm and provides stable performance during prolonged use.

Suitable for

• Cutting metal pipes and tubing
• Trimming metal profiles and channels
• Demolition tasks involving thin to medium-thickness metal sections
• On-site repair and maintenance work with reciprocating saws

Key specifications

• Material: bimetal (high-speed steel teeth on flexible backing)
• Tooth spacing: 1.8 mm
• Maximum recommended cutting thickness: up to 100 mm
• Application focus: metal cutting (pipes, profiles)
• Pack quantity: 1 blade

How to use

Fit the blade into a compatible reciprocating (sabre) saw following the saw manufacturer’s instructions and ensuring the blade is securely locked in place. Select an appropriate cutting speed and let the blade do the work without forcing it; apply steady, even pressure and avoid lateral bending. For cutting pipes, begin with a small pilot cut if needed to position the blade accurately, then proceed with continuous, controlled strokes. Replace the blade when cutting performance or tooth condition deteriorates.

Recommendations

Use appropriate personal protective equipment such as eye protection, gloves and hearing protection. For best results when cutting metal pipes or profiles, secure the workpiece and use cutting lubricant if recommended for the material. Inspect the blade for damage before use and discard if teeth are severely worn or missing.