Bosch EasyAquatak 110 painepesuri kompakti sähkö vihreä

The Bosch EasyAquatak 110 is a compact electric pressure washer designed for routine cleaning around the home and garden. It delivers a maximum working pressure of 110 bar and a maximum flow rate of 330 l/h, while accepting water temperatures up to 40 °C. The unit has a lightweight construction (4.5 kg) and a 3 m hose, making it easy to move, position and store. With a typical power consumption of 1300 W and a compact form factor, the EasyAquatak 110 suits light- to medium-duty exterior cleaning tasks.

Advantages

The EasyAquatak 110 combines high pressure performance with compact dimensions and low weight for improved handling. Its electric power source provides consistent pressure for patios, garden furniture and vehicles without the need for fuel or complex maintenance. The 3 m hose and ergonomic design enable quick setup and straightforward storage in small garages or sheds. Operating temperature allowance up to 40 °C and a maximum flow of 330 l/h support efficient rinsing and dirt removal on a variety of surfaces.

Suitable for

• Cleaning patios, driveways and garden paths
• Washing cars, bicycles and garden tools
• Removing moss, mud and light grime from outdoor surfaces
• Quick rinsing of outdoor furniture and fences

Key specifications

• Form factor: Compact
• Hose length: 3 m
• Power source: Electric
• Maximum working pressure: 110 bar
• Maximum flow rate: 330 l/h
• Power consumption (typical): 1300 W
• Maximum water temperature: 40 °C
• Weight: 4.5 kg
• Product colour: Green

How to use

Connect the pressure washer to a suitable mains supply and attach the 3 m hose to the water inlet following the manufacturer's connection instructions. Ensure the water supply is turned on and free from debris. Start the unit and test spray on a small inconspicuous area to select the appropriate distance and spray angle for the surface. Move the lance in steady passes, keeping the nozzle at a safe distance to avoid surface damage. After use, switch off the machine, disconnect the water supply, release residual pressure by triggering the lance, and store the hose and unit in a dry place.

Recommendations

Use detergents and surface cleaners only when they are compatible with electric pressure washers and the materials being cleaned; follow product instructions. Avoid using the EasyAquatak 110 on delicate painted surfaces at close range and do not run the unit with water temperatures above 40 °C. Regularly check hoses and connections for wear, and store the device indoors during freezing conditions to protect the pump.