Bosch GKS 65 GCE + FSN 1400 19 cm musta, sininen 5000 kierr./min 1800 W

The Bosch GKS 65 GCE + FSN 1400 is a handheld circular saw engineered for professional wood cutting tasks. It is powered by an 1800 W brushless motor and designed to deliver steady performance via an AC power connection. The saw accepts a 190 mm (19 cm) blade with a blade thickness of 2.6 mm and reaches a no-load speed up to 5000 RPM. With a maximum cutting depth of 65 mm at 90°, the tool combines compact dimensions with robust cutting capability for precise, repeatable results when used with the supplied guide rail.

Advantages

The tool offers a combination of high motor power and brushless design for improved efficiency and reduced maintenance compared with brushed motors. Its 190 mm blade and 65 mm cutting depth make it suitable for a wide range of timber cutting operations, while the 5000 RPM maximum speed supports clean, accurate cuts. The saw's physical size and solid build are intended to provide stability in guided cuts and everyday professional use.

Suitable for

• Crosscuts and rip cuts in softwood and many types of hardwood
• On-site carpentry work requiring a guide rail for straight, repeatable cuts
• Joinery tasks where a compact, high-speed circular saw is preferred
• Cutting sheet material and boards when a 65 mm depth is sufficient

When it may not be suitable

This circular saw is designed primarily for wood and wood-based materials; it is not intended for continuous cutting of masonry, metal, or concrete without appropriate blades and safety measures. Users who require deeper cuts than 65 mm or a cordless workflow should consider alternative machines that offer greater cutting depth or battery operation.

Key specifications

• Motor power: 1800 W
• Motor type: brushless
• Blade diameter: 190 mm
• Blade thickness: 2.6 mm
• No-load speed: up to 5000 RPM
• Maximum cutting depth at 90°: 65 mm
• Power supply: AC (mains)
• Dimensions (approx.): depth 320 mm, height 270 mm

How to use

Install a suitable 190 mm circular saw blade and secure the blade guard and baseplate according to the manufacturer's instructions. Connect the saw to a proper AC power source and check blade rotation direction before cutting. Use the guide rail FSN 1400 to align the saw for straight cuts; clamp the workpiece securely and set the cutting depth to slightly more than the material thickness. Operate the saw at full speed before engaging the cut, feed the saw steadily along the guide rail, and let the blade come to a full stop before setting the tool down. Follow general safety practices including eye, hearing and hand protection.

What to consider before purchase

• Required cutting depth: ensure 65 mm depth meets your typical material thickness
• Power source: AC mains operation vs. cordless needs
• Blade compatibility: 190 mm diameter and 2.6 mm thickness blades availability
• Use of guide rail: whether guided cutting with FSN 1400 fits your workflow

Recommendations

For best results, pair the saw with the specified guide rail for straight cuts, select a blade appropriate for the material (finish, rip or general-purpose), and maintain steady feed speed. Regularly inspect the blade and replace it when cutting quality declines. Use proper clamps and supports for long panels to maintain accuracy and reduce strain on the motor.