Bosch S 2345 X puukkosahanterä hiiliteräs (HCS) 5 kpl

Sabre saw blade Bosch S 2345 X is a set of five high-carbon steel (HCS) blades intended for controlled cutting in construction wood, boards such as chipboard and MDF, plywood, and plastic. Each blade has a working length of 150 mm and a tooth pitch suitable for fine, effortless cuts in materials up to 150 mm thick for solid wood and up to 6–60 mm for boards and plywood.

Advantages

The Bosch S 2345 X blades are made from HCS for good edge resilience when cutting softer wood-based materials and plastics. Their side set and ground teeth produce a fine, low-vibration cut with a tooth count of 6–10 TPI (minimum tooth spacing 2.5 mm). Supplied in a pack of five, the blades offer quick replacement and consistent cutting performance for repetitive tasks.

Suitable for

Key specifications

How to use

Install the Bosch S 2345 X blade into a compatible sabre or reciprocating saw following the tool manufacturer's instructions and secure the blade before operation. For best results, select an appropriate cutting speed and feed rate for the material: slower feed for thicker or denser panels, steady motion for fine, clean cuts. Replace blades when cutting quality decreases or teeth become worn.

Recommendations

Use personal protective equipment (safety glasses, gloves and hearing protection) and clamp workpieces securely. Choose the S 2345 X for finishing cuts in wood-based panels and plastics; for harder materials, consider blades with different materials or tooth geometry.