Bosch SDS plus-7X pora 8 mm 215 mm

Drill Bit Bosch SDS plus-7X 8mm 215mm is a hammer bit for SDS plus rotary hammer drills, designed for drilling into concrete, reinforced concrete and hard stone. It has an 8 mm diameter and a total length of 215 mm. The bit features a Full Carbide Head and Bosch Carbide Technology for extended durability and reliable performance on demanding masonry tasks.

Advantages

The EXPERT SDS plus-7X offers a 4-cutter Full Carbide Head manufactured from a single piece of carbide to resist jamming and impact damage. Bosch Carbide Technology and a highly resistant welded tip connection increase tip life up to three times compared with standard drill bits. The SDS plus shank enables quick bit changes in rotary hammer drills and provides stable power transfer for drilling through cured and hardened concrete.

Suitable for

• Drilling holes in reinforced concrete for fixings and installations
• Work in cured and hardened concrete
• Drilling in hard natural stone such as granite and gneiss

Key specifications

• Brand: Bosch
• Model: EXPERT SDS plus-7X
• Diameter: 8 mm
• Total length: 215 mm
• Shank type: SDS plus
• Material: Full Carbide Head with Bosch Carbide Technology
• MPN: 2608900089
• EAN: 4059952531625

How to use

Insert the SDS plus shank into the rotary hammer chuck until it locks. Select hammer-drilling mode on your rotary hammer. Start drilling at low speed to position the bit, then apply steady pressure and maintain an upright angle for straight holes while drilling in concrete or stone. Withdraw the bit periodically to clear dust and debris. Replace the bit when cutting performance noticeably decreases or if the tip is damaged.

Recommendations

Use appropriate personal protective equipment (safety glasses, hearing protection and gloves). For best results on reinforced concrete, use the EXPERT SDS plus-7X in rotary hammer drills designed for SDS plus bits and avoid side loads or bending forces that may damage the bit.