CableMod C-Series Pro ModMesh 16-Pin 2×8-Pin punottu kaapeli Corsair Type 4 ja 3 virtalähteille, 60 cm, musta

The CableMod C-Series Pro ModMesh 16-pin to 2×8-pin Sleeved Cable is a 60 cm black adapter designed to convert a single 16-pin connector from Corsair Type 4 and Type 3 power supplies into two 8-pin (12V-2x6 configuration) GPU power plugs. The sleeved ModMesh finish provides an organized appearance and protection for internal wires while maintaining compatibility with modern graphics cards that require dual 8-pin inputs. This cable is intended for use in custom PC builds and GPU upgrades where a 16-pin to dual 8-pin conversion is needed.

Advantages

The sleeved ModMesh construction improves cable routing and reduces visible clutter inside the case while offering abrasion resistance compared with unsleeved wiring. At 60 cm length the cable balances reach and neatness, allowing flexible placement for typical ATX cases without excess slack. The adapter preserves the required power lines in a single assembly, simplifying installation when converting a PSU’s 16-pin output to two separate 8-pin GPU connectors.

Suitable for

• Custom PC builds requiring a 16-pin to dual 8-pin GPU power conversion
• Upgrading or powering graphics cards that use two 8-pin power connectors
• Systems using Corsair Type 4 and Type 3 power supplies
• Improving cable management and internal aesthetics in ATX and mid-tower cases

Key specifications

• Connector type: 16-pin to 2×8-pin (12V-2x6 configuration)
• Compatibility: Corsair Type 4 and Type 3 power supplies
• Length: 60 cm
• Finish: Black sleeved ModMesh
• Intended use: GPU power delivery (dual 8-pin)

How to use

Connect the 16-pin end to the corresponding 16-pin output on a compatible Corsair Type 4 or Type 3 PSU, ensuring proper seating and alignment. Route the sleeved cable through the case to the graphics card area and attach the two 8-pin connectors to the GPU’s power sockets, observing the correct orientation. Secure any excess cable length with ties or routing channels to prevent contact with fans or other components. Verify connections are firm before powering on the system.

Recommendations

Use this adapter only with compatible power supplies and GPUs that require dual 8-pin inputs. Avoid forcing connectors; ensure pins align before applying pressure. Keep the cable away from sharp edges and high-temperature zones within the case. If uncertain about compatibility or power requirements for a specific graphics card, consult the GPU and PSU documentation.