Cooler Xilence XC044 -prosessorijäähdytin 9,2 cm musta punainen

The Xilence XC044 Processor Cooler 9.2 cm Black Red is a compact air cooler designed for consumer and workstation motherboards. It features a 92 mm fan with a rotational speed range from 600 to 2200 RPM, providing variable airflow and noise characteristics depending on system load. With physical dimensions of 123 mm (W) x 105 mm (D) x 125 mm (H) and a weight of approximately 0.685 kg, the cooler fits into most mainstream PC cases while presenting a black and red aesthetic that complements many builds.

Advantages

The cooler delivers adaptable cooling performance through a wide fan speed range, allowing a balance between thermal dissipation and acoustic level. Its compact footprint and moderate height make it compatible with many system configurations where larger tower coolers cannot be used. The supplied fan and heatsink combination targets socket compatibility across a broad set of AMD and Intel sockets, enabling reuse across platform upgrades.

Suitable for

• Cooling mainstream desktop CPUs in small to mid-size cases
• Entry-level to mid-range gaming and office systems
• System builds requiring a low-profile cooler with moderate airflow
• Replacement or upgrade for stock CPU coolers

Key specifications

• Fan diameter: 92 mm
• Fan speed: 600–2200 RPM
• Dimensions (W×D×H): 123 × 105 × 125 mm
• Weight: 0.685 kg
• Colours: Black and Red
• Supported sockets: FM2+, FM2, FM1, AM4, AM3, AM2+, AM2, LGA 2011 (Socket R), LGA 1150 (Socket H3), LGA 1155 (Socket H2), LGA 1156 (Socket H)

How to use

Install the Xilence XC044 onto a compatible motherboard following the mounting instructions supplied with the product. Apply an appropriate amount of thermal paste between the CPU heatspreader and the cooler base if thermal compound is not pre-applied. Secure the cooler to the socket mounting points, connect the fan header to the CPU fan connector on the motherboard, and verify that the fan spins and is detected in BIOS or operating system fan-control utilities. Adjust fan curve or speed settings in BIOS or with software to match desired noise and cooling balance.

Recommendations

For optimal results, ensure adequate case airflow with at least one intake and one exhaust fan. Monitor CPU temperatures under load after installation and set a conservative fan profile if system noise is a concern. Confirm physical clearance around memory modules and tall VRM heatsinks before final assembly.