CyberPower PR2000ERT2U Line-Interactive 2 kVA / 2000 W, 10x C13-lähtöä, Rack/Tower, VRLA-akku

The CyberPower PR2000ERT2U is a Line-Interactive uninterruptible power supply (UPS) delivering 2 kVA (2000 W) output with pure sine wave output suitable for office systems, workstations, networking equipment and peripherals. Its convertible rackmount/tower design and metal housing allow flexible installation in back offices, server rooms and data centres. The unit provides ten C13-type AC outlets and uses sealed lead-acid (VRLA) batteries with hot-swappable capability for maintenance, and includes one USB 2.0 port for management.

Advantages

The UPS combines Line-Interactive topology with seamless pure sine wave output to protect sensitive electronics from power disturbances while supporting a high continuous output of 2000 W. Its rackmount/tower convertible form factor and robust metal housing provide installation flexibility and durability. Battery hot-swap and support for a single main Emergency Power Off (EPO) switch simplify maintenance and emergency shutdown procedures.

Suitable for

• Office desktop PCs and workstations
• Small server rooms and network closets
• Network devices such as switches and routers
• Peripherals and point-of-sale equipment

When it may not be suitable

The PR2000ERT2U is intended for on-premises equipment requiring short-term backup and power conditioning; it is not designed for long-duration off-grid power supply. Environments that need extended runtime at full load may require an external battery bank or a higher-capacity UPS model.

Key specifications

• Topology: Line-Interactive with pure sine wave output
• Output power capacity: 2 kVA (2000 W)
• AC outlets: 10 × C13-type
• Input/Output connectors: C14-type input plug
• Battery type: Sealed Lead Acid (VRLA), hot-swappable
• Typical backup time: ~4 minutes at full load, ~13 minutes at half load
• Form factor: Convertible rackmount / tower
• Housing material and colour: Metal, black
• Dimensions (W×D×H): 433 × 412 × 86.5 mm
• Weight: 25.7 kg
• Management port: 1 × USB 2.0

How to use

Install the unit in a rack or place it on a stable surface in tower orientation according to available space. Connect protected equipment to the provided C13 outlets and connect mains power to the UPS input. Configure any required monitoring or shutdown software via the USB port. For maintenance, batteries can be hot-swapped following the manufacturer’s safety instructions to avoid interrupting protected loads. If an emergency power-off is required, connect to a compatible EPO switch to enable immediate remote shutdown.

What to consider before purchase

• Calculate combined device power draw to ensure 2000 W capacity is sufficient
• Determine required runtime and whether external battery packs are needed for extended backup
• Confirm rackmount space (19") and physical dimensions fit your cabinet or installation site
• Plan for weight (25.7 kg) when installing in racks or enclosures

Recommendations

Place the UPS in a ventilated, dust-free area, avoid stacking heavy equipment on top, perform periodic battery health checks, and test shutdown sequencing with connected systems to ensure compatibility and reliable operation.