Eaton RVS-3PHAS/125 tyyppi 1+2 ylijännitesuoja 3-vaiheinen 125 kA DIN-kisko 215617

3-phase surge arrester with combined Type 1+2 protection, delivering a total impulse current of 125 kA (10/350 µs) per pole to safeguard low-voltage power distribution systems against direct lightning strikes and switching overvoltages.

Advantages

High discharge capacity of 125 kA ensures robust protection for industrial and commercial installations. Visual status indication (green/red) allows quick on-site checking without additional tools. Compact 4-module DIN rail design simplifies installation in standard distribution boards.

Suitable for

• Main distribution boards in industrial facilities
• Commercial buildings with high lightning exposure
• Three-phase 230/400 V AC power supplies

Key specifications

• SPD type: Type 1+2
• Nominal voltage: 230/400 V AC
• Maximum continuous operating voltage (L-N): 280 V AC
• Maximum continuous operating voltage (N-PE): 350 V AC
• Impulse current (10/350 µs) per pole: 12.5 kA
• Total impulse current (10/350 µs): 125 kA
• Nominal discharge current (8/20 µs): 30 kA
• Maximum discharge current (8/20 µs): 60 kA
• Voltage protection level (L-N): < 1.5 kV
• Voltage protection level (N-PE): < 1.5 kV
• Short-circuit withstand capability: 50 kA
• Protection mode: L-N, N-PE
• Mounting: DIN rail
• Status indication: visual (green/red)
• Degree of protection: IP20
• Operating temperature range: -40 to +80 °C
• Number of modules: 4 TE

Recommendations

Install this surge arrester at the service entrance of three-phase systems to achieve effective protection against lightning-induced surges. Ensure proper grounding and follow local installation regulations.