Equip Cat.6A S/FTP -liitäntäkaapeli, kulmaliitin suoraan liittimeen, 5,0 m, musta

The Equip Cat.6A S/FTP Patch Cable with an angled to straight RJ-45 plug is a 5 m Ethernet cable designed for high-speed networking. It uses S/FTP shielding to reduce electromagnetic interference and complies with Cat.6A performance for data rates up to 10 Gbps. One end has an angled RJ-45 connector and the other a straight RJ-45 connector to enable space-saving routing and reduce strain on the cable.

Advantages

S/FTP construction provides improved protection against EMI and crosstalk compared with unshielded cables, helping to maintain signal integrity at high speeds. The angled-to-straight connector design allows connections in confined spaces and behind equipment without excessive bending. The 5 m length and black color make the cable practical for many office, data center, and home networking layouts.

Suitable for

• Server racks and data centers where space behind ports is limited
• Office workstations and switches with rear port access
• Home network connections behind routers or AV equipment
• 10GBase-T network segments requiring Cat.6A cabling

Key specifications

• Brand: EQUIP
• Length: 5 m
• Cabling technology: 10GBase-T (Cat.6A)
• Shielding: S/FTP (shielded foil twisted pair)
• Connectors: Angled RJ-45 to straight RJ-45
• Data rate: up to 10,000 Mbit/s (10 Gbps)
• Color: Black
• Weight: 0.186 kg

How to use

Connect the angled RJ-45 plug to the device or port located in a narrow or recessed area and insert the straight RJ-45 plug into the corresponding switch, patch panel, or router port. Ensure connectors click into place and avoid sharp bends near the connectors. Route the cable to minimise tension and keep it clear of sources of strong electromagnetic interference.

Recommendations

For best performance, use this Cat.6A S/FTP cable in environments requiring 10GBase-T connections and pair it with compatible shielded equipment and properly grounded infrastructure to maximise EMI protection.