Equip Cat.6A U/UTP ohut patch-kaapeli 1,0 m harmaa 10000 Mbit/s

The Equip Cat.6A U/UTP Slim Patch Cable 1.0m Grey is a slim, high-performance network patch cable designed for data centers, enterprise networks and high-density installations. With a 1 m length and grey LSZH jacket, this Cat6A U/UTP cable supports 10 Gigabit Ethernet and frequencies up to 500 MHz while maintaining a reduced diameter for improved airflow and neater cable management.

Advantages

The slim 32 AWG construction reduces bundle thickness and helps optimise rack airflow without sacrificing transmission quality. Unshielded twisted pair (U/UTP) design delivers reliable performance in typical low-to-moderate EMI environments, while stranded bare copper conductors and moulded boots with strain relief provide flexibility and durability for frequent reconfigurations. The cable is RoHS compliant and uses a Low Smoke Zero Halogen jacket for safer operation in enclosed spaces.

Suitable for

• 10 Gigabit Ethernet connections (10GBase-T)
• High-density patch panels and crowded rack installations
• PoE and PoE+ powered devices
• Short runs between switches, patch panels and network devices (1 m)

Key specifications

• Cable category: Cat.6A U/UTP (unshielded)
• Length: 1 m
• Conductor: stranded bare copper, 32 AWG
• Bandwidth / frequency: up to 500 MHz
• Data rate: up to 10 Gbit/s (10000 Mbit/s)
• Connectors: RJ-45 straight male – both ends
• Jacket: LSZH (Low Smoke Zero Halogen), colour: grey
• Standards: ISO/IEC 11801, EN 50173; RoHS compliant

How to use

Connect one RJ-45 end to a switch, patch panel or network port and the other RJ-45 end to the target device. For best performance keep cable runs within recommended lengths for horizontal patching and avoid sharp bends or tight kinks. The slim design is intended for short patching runs and high-density environments; ensure ports are fully inserted until the connector latch clicks.

Recommendations

Use this slim Cat.6A U/UTP patch cable for 1 m patching between switches, patch panels and devices in rack-mounted or high-density setups. Avoid environments with strong electromagnetic interference where shielded cabling would be preferable. Inspect connectors and strain relief before repeated reconnections to maintain reliable contacts.