Equip Cat.6A U/UTP patch-kaapeli RJ-45 3 m punainen

The Equip Cat.6A U/UTP RJ-45 3m patch cable is a 3-meter network cable designed for high-performance Ethernet connections up to 10000 Mbit/s. Fitted with RJ-45 connectors on both ends and built with U/UTP (unshielded/unscreened) Cat.6A construction, this red cable reduces interference and supports 10GBase-T environments where higher bandwidth and improved signal-to-noise margin are required.

Advantages

The Cat.6A design provides higher bandwidth and an improved signal-to-noise ratio compared with lower-category cables, enabling ultrahigh and low-error data transmission for demanding network applications. The preeminent materials and tested manufacturing ensure conformity with industry standards, while the 3 m length offers flexible placement between network devices.

Suitable for

• 10GBase-T network uplinks and switches
• High-speed workstations and servers
• Patch panels and structured cabling in data centers
• Home or office networks requiring reliable 10 Gbps connections

Key specifications

• Cable length: 3 m
• Connectors: RJ-45 to RJ-45
• Standard: Cat.6A, U/UTP
• Supported data rate: up to 10000 Mbit/s (10 Gbit/s)
• Cabling technology: 10GBase-T
• Colour: Red
• Weight: 0.081 kg

How to use

Connect one RJ-45 connector to your network device (switch, router, server or PC) and the other RJ-45 connector to the corresponding port on the second device. Ensure connectors are fully inserted and secured in the ports. For best performance, avoid tight bends and sharp kinks in the cable and keep it away from strong electromagnetic interference sources.

Recommendations

For stable 10GBase-T performance, use this Cat.6A U/UTP patch cable in combination with compatible Cat.6A-rated ports and network equipment. Install with proper cable management to maintain bend radius and prevent signal degradation.