ESUN PLA Basic 1,75 mm beige 3D-tulostusfilamentti, 1 kg

Warping, poor layer adhesion, and brittle prints are common frustrations in 3D printing, often caused by low-quality filament. The ESUN PLA Basic filament in beige solves these issues with enhanced toughness and reliable performance, making it an excellent choice for both beginners and experienced makers.

Who is it for

This filament is ideal for hobbyists, educators, and professionals who need consistent, easy-to-print PLA for prototypes, decorative items, and functional parts. Its low warping and good layer adhesion make it suitable for a wide range of FDM 3D printers.

Main features

• Enhanced toughness and impact resistance for durable prints
• Good layer adhesion and reduced warping for reliable results
• Consistent diameter of 1.75 mm with tight tolerance of ±0.03 mm
• Compatible with most FDM 3D printers
• 1 kg net weight on a sturdy plastic spool

Specifications

• Material: PLA+ (Polylactic Acid Plus)
• Filament diameter: 1.75 mm
• Diameter tolerance: ±0.03 mm
• Colour: Beige
• Net filament weight: 1 kg
• Spool material: Plastic
• Printing temperature: 205-225 °C
• Heated bed temperature: 25-70 °C (optional)
• Recommended print speed: 40-100 mm/s
• Density: 1.24 g/cm³
• Tensile strength: 30-52 MPa
• Elongation at break: 5-10%
• Melt flow index: 5-10 g/10min (210°C, 2.16kg)
• Spool outer diameter: 200 mm
• Spool width: 64 mm
• Spool hub hole diameter: 56 mm
• Storage: Cool, dry place, away from direct sunlight

Tips

For best results, store the filament in a sealed container with desiccant when not in use. Start with a nozzle temperature of 210°C and adjust within the recommended range based on your printer. A heated bed is not required, but if used, set it to 50°C for improved adhesion.