Ethernet-kaapeli ProXtend CAT6 RJ-45 20 m punainen

The ProXtend CAT6 F/UTP CU LSZH Ethernet Cable (20 m, red) is designed for high-speed data transfer up to 1000 Mbit/s and equipped with RJ-45 connectors. Constructed from 99.9% pure copper strands with AWG 26, the cable includes a foil shield (F/UTP) to reduce electromagnetic interference and an LSZH outer jacket to limit smoke and toxic fumes in case of fire. Reinforced strain relief and a snagless latch protect the connector during installation, while 50µ gold-plated contacts improve durability and transmission quality. The cable supports PoE+ and is suitable for structured network environments requiring shielded Cat6 performance.

Advantages

The cable's 99.9% copper conductors and AWG 26 specification deliver stable gigabit performance. F/UTP foil shielding reduces EMI for cleaner signals in electrically noisy environments. LSZH jacket minimizes smoke and hazardous gases in fires, meeting safety-conscious installations. Reinforced strain relief and a snagless design protect connectors during repeated handling, and 50µ gold plating on the RJ-45 contacts increases corrosion resistance and signal reliability.

Suitable for

• Gigabit Ethernet connections (10/100/1000Base-T)
• PoE+ powered devices such as IP cameras and access points
• Office and data center patching where shielded cables are preferred
• Installations requiring low-smoke zero-halogen jacketing

Key specifications

• Cable type: CAT6 F/UTP CU
• Conductor material: 99.9% pure copper, AWG 26
• Length: 20 m
• Connectors: RJ-45 to RJ-45
• Shielding: Foil screen (F/UTP)
• Jacket: LSZH (Low Smoke Zero Halogen)
• Data rate: up to 1000 Mbit/s (Gigabit Ethernet)
• PoE support: PoE+
• Contact plating: 50µ gold
• Colour: Red

How to use

Uncoil the 20 m cable and route it along the desired path, avoiding tight bends and sharp edges. Insert the RJ-45 connectors firmly into compatible network ports until the latch clicks. For rack or panel installations, use cable management to secure the cable and relieve tension on connectors. Confirm link activity on network devices and test throughput to verify correct installation and performance.

Recommendations

For best results, install the cable away from strong electrical interference sources and maintain bend radii larger than the cable diameter. Use shielded patch panels and properly grounded terminations when deploying F/UTP cables to preserve shielding effectiveness.