Ethernet-kaapeli ProXtend CAT6A RJ-45 U/UTP 0,75 m punainen

The ProXtend CAT6A U/UTP CU Ethernet Cable (0.75 m, red) features 24 AWG 99.9% pure copper conductors, LSZH outer jacket and RJ-45 connectors on both ends. It supports 10GBase-T data rates up to 10000 Mbit/s and is compatible with PoE+ to power connected devices over the network. The cable uses U/UTP construction to reduce interference while maintaining flexibility for installation.

Advantages

The cable’s 99.9% pure copper strands and 24 AWG size provide stable high-speed transmission for 10G networking. An LSZH (Low Smoke Zero Halogen) jacket reduces smoke and toxic emissions in the event of fire. Connectors are plated with 50 µ" gold for improved contact durability and transmission quality, and a snagless latch and strain relief increase mechanical durability during installation and use.

Suitable for

• 10GBase-T network links in data centers and offices
• Short horizontal runs and patch panels (0.75 m length)
• PoE+ powered devices such as access points and IP phones

Key specifications

• Length: 0.75 m
• Category: CAT6A U/UTP CU
• Conductor: 24 AWG, 99.9% pure copper
• Data rate: up to 10000 Mbit/s (10GBase-T)
• Connector: RJ-45 — gold plated (50 µ" gold)
• Jacket: LSZH (Low Smoke Zero Halogen)
• Color: Red
• PoE support: PoE+

How to use

Connect RJ-45 connectors to the network ports of your devices such as switches, patch panels, routers or networked equipment. Use the 0.75 m cable for short patching runs between adjacent equipment or within patch panels. Ensure connectors are fully inserted until the latch clicks to secure the connection; avoid sharp bends and excessive pulling on the cable to maintain signal integrity.

Recommendations

For best performance, avoid running the cable alongside strong electromagnetic sources (large motors, fluorescent ballasts). Use the cable for short-distance connections within racks or between closely spaced devices; replace if visible damage to the jacket or connectors appears.