Finder 45.71.7.048.1310 PCB-tehorele 48 V DC 16 A 1 NO

When a control circuit needs to switch a high-current AC load from a low-power DC signal, a compact PCB relay is often the answer. The Finder 45.71.7.048.1310 is a PCB power relay with a 48 V DC coil and a single normally open contact rated for 16 A at 250 V AC. It is part of the Finder Series 45, designed for direct mounting on printed circuit boards.

Who is it for

This relay suits engineers and technicians building or repairing industrial controls, HVAC systems, appliance controls, and other electronic devices that require reliable switching of moderate AC loads. Its reinforced insulation and flux-proof construction make it appropriate for use in demanding environments.

Main features

• Coil voltage: 48 V DC
• Contact configuration: 1 normally open (1 NO)
• Rated contact current: 16 A
• Rated contact voltage: 250 V AC
• Max switching power: 4000 VA (AC1)
• Contact material: silver nickel (AgNi)
• Dielectric strength coil-contact: 5000 V AC
• Dielectric strength open contacts: 1000 V AC
• Mounting: PCB, through-hole pins
• Operating temperature range: -40 to +85 °C
• Coil power consumption: 0.5 W
• Insulation: reinforced
• Protection degree: RT II (flux proof)
• Approvals: VDE, UL, CSA, RINA

Specifications

• Product type: PCB power relay
• Series: Finder 45
• Coil voltage: 48 V DC
• Contact configuration: 1 NO
• Rated current: 16 A
• Rated voltage: 250 V AC
• Max switching power: 4000 VA
• Contact material: AgNi
• Dielectric strength (coil-contact): 5000 V AC
• Dielectric strength (open contacts): 1000 V AC
• Mounting type: PCB
• Terminal type: PCB pins
• Operating temperature: -40 to +85 °C
• Coil power: 0.5 W
• Insulation: reinforced
• Protection: RT II
• Approvals: VDE, UL, CSA, RINA

Tips

Ensure the PCB layout matches the relay's pin configuration and that the coil drive circuit can supply the required 0.5 W at 48 V DC. For inductive loads, consider using a snubber or varistor to protect the contacts and extend relay life.